Driveshafts

Driveshafts

Filters

OGWG Off-Road Recommended.

Built for serious trail performance and real-world abuse. This Jeep JK Front Driveshaft (1310) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.

SKU: ASDJK-1310F-S-HVHK

New Front Extreme Duty Jeep JK Wrangler Rubicon or Non Rubicon 1310 CV Driveshaft with Solid U-joints Custom made by Adams Driveshaft.

Why not Buy from a Company that Owns, Lives, and Breathes Offroad vehicles like we do? We Test our Products on our own Jeeps to make sure the parts we are using hold up to the Pressure and Abuse that they are put through.

Application:

Fits 2007 thru 2018 Jeep JK Wrangler 2 or 4 Door.

This OEM Front Flange Style Extreme Duty Series Solid 1310 CV Driveshaft will work up to 37 inch Tall Tires after that size we Recommend you upgrading to our (Extreme Duty 1350 Solid Non Greaseable Series).

Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.

We do know most of the measurements of your JK up to a 4 1/2 inch lift after that we would need a measurement.

Please Note: If you have a RockKrawler Lift Kit or Coil Over Lift Kit we would need you to get us a Measurement after the lift is installed.

BeneFits:

  • Front Driveshaft Part ASDJK-1310F-S
  • Made out of 2 inch X .120 Wall D.O.M. tubing that is Double the Strength of the Factory Tubing and will clear the exhaust and cross member eliminating damage to the driveshaft at full droop.
  • Has Long Full Spline Slip n Stub unlike some of our Competitors.
  • Built Only with Components made by Spicer and Neapco.
  • Has the Strongest Non Greaseable U-joints on the Market.
  • Has a Heavy Duty Flange on it that Fits your OEM Pinion Flange so it is Easier to install and you won't need to Disturb the Crush Sleeve.
  • Comes with Grade 10 CV Bolts with small heads on them so they are easier to install and a Packet of Loctite.

This Item will include the following parts as Pictured up Top:

  • (1) 2 inch X .120 Wall Extreme Duty 1310 CV Driveshaft with Solid Non Greasable U-joints, With a OEM Style Flange. Lifetime Warranty if you twist our tube or break a weld due to Torque.
  • (1) American Made Front 1310 Transfer Case Output Shaft Yoke.
  • (4) Grade 10 CV bolts.
  • Driveshaft comes painted Gloss Black Show Quality.

Why Run Adams Forged?

  • Precision balanced for highway stability
  • Trail-proven durability
  • Heavy-duty U-joint construction
  • Built for lifted and off-road applications
  • Made in the USA

Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.

$649.95

OGWG Off-Road Recommended.

Built for serious trail performance and real-world abuse. This Jeep JK Front Driveshaft (1310) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.

SKU: ASDJK-1310F-S2Y-HVHK

New Front Extreme Duty Jeep JK Wrangler Rubicon or Non Rubicon 1310 CV Driveshaft with Solid U-joints with a Front American Made Pinion yoke.

Why not Buy from a Company that Owns, Lives, and Breathes Offroad vehicles like we do? We Test our Products on our own Jeeps to make sure the parts we are using hold up to the Pressure and Abuse that they are put through.

Application:Fits 2007 thru 2018 Jeep JK WWrangler 2 or 4 Door.

Front Driveshaft Part ASDJK-1310F-S2Y

This Front Extreme Duty Series Solid 1310 CV Driveshaft will work up to 37 inch Tall Tires after that size we Recommend you upgrading to our (Extreme Duty 1350 Solid Non Greaseable Series).

Bigger tires add more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.

We do know most of the measurements of your JK up to a 4 1/2 inch lift after that we would need a measurement.

Please Note: If you have a RockKrawler Lift Kit or Coil Over Lift Kit we would need you to get us a Measurement after the lift is installed.

BeneFits:

  • Made out of 2 inch X .120 Wall D.O.M. tubing that is Double the Strength of the Factory Tubing and will clear the exhaust and cross member eliminating damage to the driveshaft at full droop.
  • Has Long Full Spline Slip n Stub unlike some of our Competitors.
  • Built Only with Components made by Spicer and Neapco.
  • Has the Strongest Non Greaseable U-joints on the Market.
  • Comes with an American made Heavy Duty Front Pinion Yoke with Heavy Duty 1310 U-bolts.
  • Comes with Grade 10 CV Bolts with small heads on them so they are easier to install and a Packet of Loctite.

This Item will include the following parts as Picture up Top:

  • (1) 1310 2 inch X .120 Wall Rock Crawler CV Driveshaft with Solid U-joints. Lifetime Warranty if you twist our Tube or break a Weld.
  • (1) American Made Front 1310 Transfer Case Output Shaft Yoke.
  • (1) American Made Front Dana 30 or Dana 44 Pinion Yoke.
  • (1) Set of Heavy Duty U-bolts for front pinion yoke.
  • (1) Set of 4 Grade 10 CV Bolts.
  • Driveshaft comes painted Gloss Black Show Quality.

Why Run Adams Forged?

  • Precision balanced for highway stability
  • Trail-proven durability
  • Heavy-duty U-joint construction
  • Built for lifted and off-road applications
  • Made in the USA

Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.

$669.95

OGWG Off-Road Recommended.

Built for serious trail performance and real-world abuse. This Rear Driveshaft (1350) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.

SKU: ASDF-PM5002-HVHK

If you have or are getting ready to install a Ford 8.8 Rear Differential in your Offroad Vehicle, then this yoke is a must. This 8.8 Yoke gives you up to 30 degrees depending on how thick your slip yoke is and the Factory Flange only gives you 22 degrees. This yoke has more Angle than any other Yoke on the Market so it can handle more Articulation in Offroad Applications.

This Rear Pinion yoke is the Strongest on the Market and will allow you to install a 1350 Series Driveshaft to the Rear of your Jeep, Etc.

Benefits of this Yoke over Others:

  • Adams Manufacture's this Forged Yoke in the U.S.A.
  • U-joint Cap area is Machined to Support the cap all the way around.
  • The U-joint Cap Retainer/Tab goes half way around the yoke unlike most yokes with 3/8" around.
  • Strongest 8.8 Pinion Yoke on the Market.

This Item will come with the Following Parts:

  • (1) Forged 8.8 1350 Series Rear Pinion Yoke.
  • (1) Set of 1350 Series U-bolts that are made in the U.S.A.
  • (1) Packet of Red Threadlocker.

Why Run Adams Forged?

  • Precision balanced for highway stability
  • Trail-proven durability
  • Heavy-duty U-joint construction
  • Built for lifted and off-road applications
  • Made in the USA

Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.

$119.95

OGWG Off-Road Recommended.

Built for serious trail performance and real-world abuse. This Jeep JK Rear Driveshaft (1350) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.

SKU: ASDJK-1350R-G4D-HVHK

This Extreme Duty Solid 1350 CV Driveshaft will work up to 42 inch Tall Tires. After that you would need to go with our (Insane Duty 1410 Solid U-joint Series) that is coming soon. Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.

We do know most of the measurements of your JK, but there are some we do not due to the many different size of lifts, and differentials.

Please Note: If you have Coil Overs, Rock Krawler brand Lift kit, a Lift Higher that 4.5 inch, have installed a different T-case, or a Different Differential we will need you to get us a measurement.

This Item will include the following parts:

  • (1) 1350 Greaseable U-joint 2 1/2 inch X .095 Wall Rock Crawler CV Driveshaft. Lifetime Warranty if you twist our Tube or break a Welds due to Torque.
  • (1) 1350 Rear Transfer Case Output Shaft Flange Yoke.
  • (1) 1350 Rear Dana 44 Pinion Yoke.
  • (1) Set of 1350 U-bolts.
  • (1) Set of Grade 10 CV Bolts. There is four bolts with small heads so they are easier to install.
  • Driveshaft comes painted Gloss Black Show Quality.

Application:

  • 2007 to 2018 Jeep JK Wrangler's 4 Door Models up to a 4 inch Lift. These driveshafts are custom made so if you have altered the Rear differential, or transfer case example (Dyna track 60 or Atlas) we can accommodate you. We will just need to know this Information after you have ordered.

Please Note: Depending on the size and manufacturer of your lift kit, rear upper adjustable control arms may be needed to help set the pinion angle.

Why Run Adams Forged?

  • Precision balanced for highway stability
  • Trail-proven durability
  • Heavy-duty U-joint construction
  • Built for lifted and off-road applications
  • Made in the USA

Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.

$839.95

OGWG Off-Road Recommended.

Built for serious trail performance and real-world abuse. This Jeep JK Rear Driveshaft (1350) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.

SKU: ASDJK-1350R-G2D-HVHK

This Extreme Duty Solid 1350 CV Driveshaft will work up to 42 inch Tall Tires. After that you would need to go with our (Insane Duty 1410 Solid U-joint Series) that is coming soon. Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.

We do know most of the measurements of your JK, but there are some we do not due to the many different size of lifts, and differentials.

Please Note: If you have Coil Overs, Rock Krawler brand Lift kit, a Lift Higher that 4.5 inch, have installed a different T-case, or a Different Differential we will need you to get us a measurement.

This Item will include the following parts:

  • (1) 1350 Greaseable U-joint 2 1/2 inch X .095 Wall Rock Crawler CV Driveshaft. Lifetime Warranty if you twist our Tube or break a Welds due to Torque.
  • (1) 1350 Rear Transfer Case Output Shaft Flange Yoke.
  • (1) 1350 Rear Dana 44 Pinion Yoke.
  • (1) Set of 1350 U-bolts.
  • (1) Set of Grade 10 CV Bolts. There is four bolts with small heads so they are easier to install.
  • Driveshaft comes painted Gloss Black Show Quality.

Application:

  • 2007 to 2018 Jeep JK Wrangler's 2 Door Models up to a 4 inch Lift. These driveshafts are custom made so if you have altered the Rear differential, or transfer case example (Dyna track 60 or Atlas) we can accommodate you. We will just need to know this Information after you have ordered.

Please Note: Depending on the size and manufacturer of your lift kit, rear upper adjustable control arms may be needed to help set the pinion angle.

Why Run Adams Forged?

  • Precision balanced for highway stability
  • Trail-proven durability
  • Heavy-duty U-joint construction
  • Built for lifted and off-road applications
  • Made in the USA

Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.

$839.95

OGWG Off-Road Recommended.

Built for serious trail performance and real-world abuse. This Jeep JK Rear Driveshaft (1310) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.

SKU: ASDJK-1310R-G4D-HVHK

This Rear Heavy Duty Series Greasable 1310 CV Driveshaft will work up to 35 inch Tall Tire's after that size we Recommend you upgrading to our (Extreme Duty 1310 Solid Series).

Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.

We do know most of the measurements of your JK up to a 4 1/2 inch lift after that we would need a measurement. Please note: If you have a Rock Krawler X-Factor Lift Kit or Coil Over Lift Kit we would need you to get us a Measurement after the lift is installed.

Benefits:

  • 2 Door Driveshaft: Part Number ASDJK-1310R-G2D 4 Door Driveshaft: Part Number ASDJK-1310R-G4D
  • Made out of 2 1/2 inch X .083 Wall D.O.M. tubing that is Double the Strength of the Factory Tubing. Lifetime Warranty on the Welds and Tubing if Twisted by Torque.
  • Has a Longer Slip n Stub and a Double Lip Seal to help keep out Debris.
  • Built only with Components made by Spicer and Neapco.
  • Has Greaseable U-joints not Offshore U-joints with different color Seals.
  • Comes with an American Made Transfer Case Yoke with Grade 10 CV Bolts with small heads on them so they are easier to install and a Packet of Loctite.
  • Has an American Made Dana 44 Pinion Yoke and Heavy Duty 1310 U-Bolts.
  • Driveshaft comes painted Gloss Black Show Quality.

This Item will include the following parts:

  • (1) 2 1/2 inch X .083 Wall Heavy Duty 1310 CV Driveshaft with Greaseable U-joints.
  • (1) American Made 1310 Rear Transfer Case Output Shaft Yoke.
  • (1) American Made 1310 Rear Dana 44 Pinion Yoke.
  • (1) Set of Heavy Duty 1310 U-bolts.
  • (1) Set of Grade 10 CV Bolts. There is four bolts total and they have small heads on them so they are easier to install.

Please Note: Depending on the size and manufacturer of your lift kit, rear upper adjustable control arms may be needed to help set the pinion angle.

Application:

  • Fits 2007 Thru 2018 Jeep JK Wranglers 4 Door Models.

Why Run Adams Forged?

  • Precision balanced for highway stability
  • Trail-proven durability
  • Heavy-duty U-joint construction
  • Built for lifted and off-road applications
  • Made in the USA

Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.

$669.95

OGWG Off-Road Recommended.

Built for serious trail performance and real-world abuse. This Jeep JK Rear Driveshaft (1310) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.

SKU: ASDJK-1310R-G2D-HVHK

This Rear Heavy Duty Series Greasable 1310 CV Driveshaft will work up to 35 inch Tall Tire's after that size we Recommend you upgrading to our (Extreme Duty 1310 Solid Series).

Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.

We do know most of the measurements of your JK up to a 4 1/2 inch lift after that we would need a measurement. Please note: If you have a Rock Krawler X-Factor Lift Kit or Coil Over Lift Kit we would need you to get us a Measurement after the lift is installed.

Benefits:

  • 2 Door Driveshaft: Part Number ASDJK-1310R-G2D 4 Door Driveshaft: Part Number ASDJK-1310R-G4D
  • Made out of 2 1/2 inch X .083 Wall D.O.M. tubing that is Double the Strength of the Factory Tubing. Lifetime Warranty on the Welds and Tubing if Twisted by Torque.
  • Has a Longer Slip n Stub and a Double Lip Seal to help keep out Debris.
  • Built only with Components made by Spicer and Neapco.
  • Has Greaseable U-joints not Offshore U-joints with different color Seals.
  • Comes with an American Made Transfer Case Yoke with Grade 10 CV Bolts with small heads on them so they are easier to install and a Packet of Loctite.
  • Has an American Made Dana 44 Pinion Yoke and Heavy Duty 1310 U-Bolts.
  • Driveshaft comes painted Gloss Black Show Quality.

This Item will include the following parts:

  • (1) 2 1/2 inch X .083 Wall Heavy Duty 1310 CV Driveshaft with Greaseable U-joints.
  • (1) American Made 1310 Rear Transfer Case Output Shaft Yoke.
  • (1) American Made 1310 Rear Dana 44 Pinion Yoke.
  • (1) Set of Heavy Duty 1310 U-bolts.
  • (1) Set of Grade 10 CV Bolts. There is four bolts total and they have small heads on them so they are easier to install.

Please Note: Depending on the size and manufacturer of your lift kit, rear upper adjustable control arms may be needed to help set the pinion angle.

Application:

  • Fits 2007 Thru 2018 Jeep JK Wranglers 2 Door Models.

Why Run Adams Forged?

  • Precision balanced for highway stability
  • Trail-proven durability
  • Heavy-duty U-joint construction
  • Built for lifted and off-road applications
  • Made in the USA

Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.

$669.95

OGWG Off-Road Recommended.

Built for serious trail performance and real-world abuse. This Jeep JK Rear Driveshaft (1350) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.

SKU: ASDJK-1350R-S2D-HVHK

This Extreme Duty Solid 1350 CV Driveshaft will work up to 42 inch Tall Tires. After that you would need to go with our (Insane Duty 1410 Solid U-joint Series) that is coming soon. Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.

This Item will include the following parts:

  • (1) 1350 Solid U-joint 2 1/2 inch X .095 Wall Rock Crawler CV Driveshaft. Lifetime Warranty if you twist our Tube or break a Welds due to Torque.
  • (1) 1350 Rear Transfer Case Output Shaft Flange Yoke.
  • (1) 1350 Rear Dana 44 Pinion Yoke.
  • (1) Set of 1350 U-bolts.
  • (1) Set of Grade 10 CV Bolts. There is four bolts with small heads so they are easier to install.
  • Driveshaft comes painted Gloss Black Show Quality.

Application:

  • 2007 to 2018 Jeep JK Wrangler's 2 Door Models up to a 4 inch Lift. These driveshafts are custom made so if you have altered the Rear differential, or transfer case example (Dyna track 60 or Atlas) we can accommodate you. We will just need to know this Information after you have ordered.

Please Note:

  • Depending on the size and manufacturer of your lift kit, rear upper adjustable control arms may be needed to help set the pinion angle
  • We do know most of the measurements of your JK, but there are some we do not due to the many different size of lifts, and differentials.
  • If you have Coil Overs, Rock Krawler brand Lift kit, a Lift Higher that 4.5 inch, have installed a different T-case, or a Different Differential we will need you to get us a measurement.

Why Run Adams Forged?

  • Precision balanced for highway stability
  • Trail-proven durability
  • Heavy-duty U-joint construction
  • Built for lifted and off-road applications
  • Made in the USA

Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.

$839.95

OGWG Off-Road Recommended.

Built for serious trail performance and real-world abuse. This Jeep JK Rear Driveshaft (1310) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.

SKU: ASDJK-1310R-S4D-HVHK

This Rear Extreme Duty Series Solid 1310 CV Driveshaft will work up to 37 inch Tall Tire's after that size we Recommend you upgrading to our (Extreme Duty 1350 Solid Series). Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.

We do know most of the measurements of your JK up to a 4 1/2 inch lift after that we would need a measurement.

Please note: If you have a Rock Krawler X-Factor Lift Kit or Coil Over Lift Kit we would need you to get us a Measurement after the lift is installed.

Benefits:

  • Made out of 2 1/2 inch X .095 Wall D.O.M. tubing that is more than Double the Strength of the Factory Tubing. Lifetime Warranty on the Welds and Tubing if Twisted by Torque.
  • Has a Longer Slip n Stub and a Double Lip Seal to help keep out Debris.
  • Built only with Components made by Spicer and Neapco.
  • Has the Strongest Solid U-joints on the Market.
  • Comes with an American Made Transfer Case Yoke with Grade 10 CV Bolts with small heads on them so they are easier to install and a Packet of Loctite.
  • Has an American Made Dana 44 Pinion Yoke and Heavy Duty 1310 U-Bolts.
  • Driveshaft comes painted Gloss Black Show Quality.

This Item will include the following parts:

  • (1) 2 1/2 inch X .095 Wall Heavy Duty 1310 CV Driveshaft with Solid U-joints.
  • (1) American Made 1310 Rear Transfer Case Output Shaft Yoke.
  • (1) American Made 1310 Rear Dana 44 Pinion Yoke.
  • (1) Set of Heavy Duty 1310 U-bolts.
  • (1) Set of Grade 10 CV Bolts. There is four bolts total and they have small heads on them so they are easier to install.

Application:

  • Fits 2007 Thru 2018 Jeep JK Wranglers 4 Door Models

Why Run Adams Forged?

  • Precision balanced for highway stability
  • Trail-proven durability
  • Heavy-duty U-joint construction
  • Built for lifted and off-road applications
  • Made in the USA

Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.

$669.95

No results found

No results match your search. Try removing a few filters.