Driveshafts JK-JKU

Driveshafts JK-JKU

Filters

JK REAR 1350 CV DRIVESHAFT [EXTREME DUTY SERIES] SOLID U-JOINT ADAMS DRIVESHAFT - 4 Door Models

OGWG Off-Road Recommended.

Built for serious trail performance and real-world abuse. This Jeep JK Rear Driveshaft (1350) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.

SKU: ASDJK-1350R-S4D-HVHK

This Extreme Duty Solid 1350 CV Driveshaft will work up to 42 inch Tall Tires. After that you would need to go with our (Insane Duty 1410 Solid U-joint Series) that is coming soon. Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.

This Item will include the following parts:

  • (1) 1350 Solid U-joint 2 1/2 inch X .095 Wall Rock Crawler CV Driveshaft. Lifetime Warranty if you twist our Tube or break a Welds due to Torque.
  • (1) 1350 Rear Transfer Case Output Shaft Flange Yoke.
  • (1) 1350 Rear Dana 44 Pinion Yoke.
  • (1) Set of 1350 U-bolts.
  • (1) Set of Grade 10 CV Bolts. There is four bolts with small heads so they are easier to install.
  • Driveshaft comes painted Gloss Black Show Quality.

Application:

  • 2007 to 2018 Jeep JK Wrangler's 4 Door Models up to a 4 inch Lift. These driveshafts are custom made so if you have altered the Rear differential, or transfer case example (Dyna track 60 or Atlas) we can accommodate you. We will just need to know this Information after you have ordered.

Please Note:

  • Depending on the size and manufacturer of your lift kit, rear upper adjustable control arms may be needed to help set the pinion angle
  • We do know most of the measurements of your JK, but there are some we do not due to the many different size of lifts, and differentials.
  • If you have Coil Overs, Rock Krawler brand Lift kit, a Lift Higher that 4.5 inch, have installed a different T-case, or a Different Differential we will need you to get us a measurement.

Why Run Adams Forged?

  • Precision balanced for highway stability
  • Trail-proven durability
  • Heavy-duty U-joint construction
  • Built for lifted and off-road applications
  • Made in the USA

Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.

$839.95
Jeep JK Rear Driveshaft (1310) — Adams Forged 2 Door Models

OGWG Off-Road Recommended.

Built for serious trail performance and real-world abuse. This Jeep JK Rear Driveshaft (1310) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.

SKU: ASDJK-1310R-S2D-HVHK

This Rear Extreme Duty Series Solid 1310 CV Driveshaft will work up to 37 inch Tall Tire's after that size we Recommend you upgrading to our (Extreme Duty 1350 Solid Series). Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.

We do know most of the measurements of your JK up to a 4 1/2 inch lift after that we would need a measurement.

Please note: If you have a Rock Krawler X-Factor Lift Kit or Coil Over Lift Kit we would need you to get us a Measurement after the lift is installed.

Benefits:

  • Made out of 2 1/2 inch X .095 Wall D.O.M. tubing that is more than Double the Strength of the Factory Tubing. Lifetime Warranty on the Welds and Tubing if Twisted by Torque.
  • Has a Longer Slip n Stub and a Double Lip Seal to help keep out Debris.
  • Built only with Components made by Spicer and Neapco.
  • Has the Strongest Solid U-joints on the Market.
  • Comes with an American Made Transfer Case Yoke with Grade 10 CV Bolts with small heads on them so they are easier to install and a Packet of Loctite.
  • Has an American Made Dana 44 Pinion Yoke and Heavy Duty 1310 U-Bolts.
  • Driveshaft comes painted Gloss Black Show Quality.

This Item will include the following parts:

  • (1) 2 1/2 inch X .095 Wall Heavy Duty 1310 CV Driveshaft with Solid U-joints.
  • (1) American Made 1310 Rear Transfer Case Output Shaft Yoke.
  • (1) American Made 1310 Rear Dana 44 Pinion Yoke.
  • (1) Set of Heavy Duty 1310 U-bolts.
  • (1) Set of Grade 10 CV Bolts. There is four bolts total and they have small heads on them so they are easier to install.

Application:

  • Fits 2007 Thru 2018 Jeep JK Wranglers 2 Door Models

Why Run Adams Forged?

  • Precision balanced for highway stability
  • Trail-proven durability
  • Heavy-duty U-joint construction
  • Built for lifted and off-road applications
  • Made in the USA

Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.

$669.95
Jeep JK Front 1350 CV Driveshaft [EXTREME DUTY SERIES] Solid U-joint - Pinion Yoke (1350) — 2 or 4 Door

OGWG Off-Road Recommended.

Built for serious trail performance and real-world abuse. This Jeep JK Front Driveshaft (1350) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.

SKU: ASDJK-1350F-S-HVHK

New Front Extreme Duty Jeep JK Wrangler Rubicon or Non Rubicon 1350 Series CV Driveshaft With Solid U-joints Custom made by Adams Driveshaft.

Application: 2007 to 2018 Jeep JK Wrangler's 2 or 4 Door Models up to a 4 inch Lift.

These driveshafts are custom made so if you have altered the front or rear differentials, or transfer case's example (Dyna track housings, Spicer Ultimate 60's or Atlas Transfer cases) we can accommodate you. We will just need to know this Information and may have to have you get us a measurement.

We do know most of the measurements of your JK, but there are some we do not due to the many different size of lifts, and differentials.

Please Note: If you have Coil Overs, Rock Krawler brand Lift kit, a Lift Higher that 4.5 inch, have installed a different T-case, or a Different Differential we will need you to get us a measurement.

This Extreme Duty Solid 1350 CV Driveshaft will work up to 42 inch Tall Tires. Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.

This Item will include the following parts:

  • (1) 1350 Solid U-joint 2 inch X .120 Wall Rock Crawler CV Driveshaft. Lifetime Warranty if you twist our Tube or break a Weld.
  • (1) 1350 Front Transfer Case Output Shaft Yoke.
  • (1) 1350 Front Dana 44 Pinion Yoke.
  • (1) Set of Grade 10 CV Bolts. There is four bolts with small heads so they are easier to install.
  • (1) Set of 1350 U-Bolts.
  • Driveshaft comes painted Gloss Black Show Quality.

Why Run Adams Forged?

  • Precision balanced for highway stability
  • Trail-proven durability
  • Heavy-duty U-joint construction
  • Built for lifted and off-road applications
  • Made in the USA

Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.

$799.95

No results found

No results match your search. Try removing a few filters.