OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JL Rear Driveshaft (1350) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
This Extreme Duty Series Solid 1350 CV Driveshaft will work up to 42 inch Tall Tires, after that size we recommend upgrading to our (Extreme Duty 1410 Solid Series). Bigger tires add more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc., so you want to make sure you are buying the Strongest driveshaft for your Jeep. This Driveshaft will work up to a 6 inch Lift after that the angle may be too Severe or Bind.
Benefits of Buying an Adams Driveshaft:
Rear Driveshaft 2 Door Part Number ASDJL-1350R-S2D, 4 Door Part Number ASDJL-1350R-S4D
Made out of 2 1/2 inch X .095 Wall D.O.M. tubing that is Double the Strength of the Factory Tubing to Handle more Abuse. Competitors use 2 1/2 inch x .083 or 3 inch x .083.
Has a Longer Slip n Stub than some of our Competitors.
Built only with Components made by Spicer and Neapco.
Uses the Strongest Non Greaseable U-joints on the Market.
American Made Rear 1350 Flange Style T-case Yoke that gives you more Angle.
Comes with a Forged 1350 U-bolt Style Pinion Yoke.
Contains a set of (4) Grade 10 CV Bolts with small heads on them so they are easier to install and Loctite.
Driveshafts come painted Gloss Black Show Quality.
This Item will include the following parts:
(1) 2 1/2 inch X .95 Wall Extreme Duty 1350 CV Driveshaft with Solid U-joints. Lifetime Warranty if you twist our tube, break a weld, or Break a U-joint in half due to Torque.
(1) Rear 1350 Flange Style Transfer Case Output Shaft Yoke.
(1) Rear 1350 Forged U-bolt Style Pinion Yoke.
(1) Set of 1350 U-bolts.
(1) Set of Grade 10 CV Bolts. There is Four bolts with small heads so they are easier to install.
Please Note:
Depending on the size and manufacturer of your lift kit, rear upper adjustable control arms may be needed to help set the pinion angle.
We do know most of the measurements of your JK, but there are some we do not due to the many different size of lifts, and differentials.
If you have Coil Overs, Rock Krawler brand Lift kit, a Lift Higher that 4.5 inch, have installed a different T-case, or a Different Differential we will need you to get us a measurement.
Application:
Fits 2018-Present Jeep JL Wrangler Rubicon - Sport - Sahara 4 Door Models - Does Not Fit 4XE Models
Precision balanced for highway stability
Trail-proven durability
Heavy-duty U-joint construction
Built for lifted and off-road applications
Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JL Rear Driveshaft (1350) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
This Extreme Duty Series Solid 1350 CV Driveshaft will work up to 42 inch Tall Tires, after that size we recommend upgrading to our (Extreme Duty 1410 Solid Series). Bigger tires add more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc., so you want to make sure you are buying the Strongest driveshaft for your Jeep. This Driveshaft will work up to a 6 inch Lift after that the angle may be too Severe or Bind.
Benefits of Buying an Adams Driveshaft:
Rear Driveshaft 2 Door Part Number ASDJL-1350R-S2D, 4 Door Part Number ASDJL-1350R-S4D
Made out of 2 1/2 inch X .095 Wall D.O.M. tubing that is Double the Strength of the Factory Tubing to Handle more Abuse. Competitors use 2 1/2 inch x .083 or 3 inch x .083.
Has a Longer Slip n Stub than some of our Competitors.
Built only with Components made by Spicer and Neapco.
Uses the Strongest Non Greaseable U-joints on the Market.
American Made Rear 1350 Flange Style T-case Yoke that gives you more Angle.
Comes with a Forged 1350 U-bolt Style Pinion Yoke.
Contains a set of (4) Grade 10 CV Bolts with small heads on them so they are easier to install and Loctite.
Driveshafts come painted Gloss Black Show Quality.
This Item will include the following parts:
(1) 2 1/2 inch X .95 Wall Extreme Duty 1350 CV Driveshaft with Solid U-joints. Lifetime Warranty if you twist our tube, break a weld, or Break a U-joint in half due to Torque.
(1) Rear 1350 Flange Style Transfer Case Output Shaft Yoke.
(1) Rear 1350 Forged U-bolt Style Pinion Yoke.
(1) Set of 1350 U-bolts.
(1) Set of Grade 10 CV Bolts. There is Four bolts with small heads so they are easier to install.
Please Note:
Depending on the size and manufacturer of your lift kit, rear upper adjustable control arms may be needed to help set the pinion angle.
We do know most of the measurements of your JK, but there are some we do not due to the many different size of lifts, and differentials.
If you have Coil Overs, Rock Krawler brand Lift kit, a Lift Higher that 4.5 inch, have installed a different T-case, or a Different Differential we will need you to get us a measurement.
Application:
Fits 2018-Present Jeep JL Wrangler Rubicon - Sport - Sahara 4 Door Models - Does Not Fit 4XE Models
Precision balanced for highway stability
Trail-proven durability
Heavy-duty U-joint construction
Built for lifted and off-road applications
Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
