Shop
Shop
- All |
- Recovery Gear |
- Fenders |
- Body |
- Molle Panels |
- Front Bumpers |
- Rear Bumpers |
- Rock Sliders |
- Electrical/Solar |
- Torq Locker |
- Axles |
- Winches |
- Pod Lights |
- Switch Panels |
- Light Bars |
- Driveshafts XJ |
- Driveshafts LJ |
- Driveshafts CJ |
- Driveshafts YJ |
- Driveshafts TJ |
- Driveshafts JT |
- Driveshafts JL-JLU |
- Driveshafts JK-JKU |
- Electrical |
- Lighting |
- Aussie Lockers |
- DIY Builder |
- Armor |
- Suspension |
- Driveshafts |
Filters
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Front Driveshaft (1310) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDXJ-1310CVF-G-HVHK
You are buying a Front XJ Cherokee 1310 (Heavy Duty Series) CV Driveshaft made by Adams Driveshaft the Industry Leader in Custom Driveshafts.
Adams Driveshaft custom makes these driveshaft using Only the best components made by two American Companies, Spicer and Neapco. We Start out installing the Strongest Greaseable U-joints and use the Strongest castings of Components possible. Then we use D.O.M tubing that we back up with a Lifetime Warranty if you Twist it or Break our Welds. Warranty
This Heavy Duty Series Greaseable 1310 CV Driveshaft will work up to 35 inch Tall Tire's after that size we Recommend you upgrading to our (Extreme Duty 1310 Solid Series).
Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.
Why not Buy off of Company that Deals, Wheels, and Builds Driveshafts. As you can see in the Pictures above we Test our Products on our own Jeeps to make sure the parts we are using hold up to the Pressure and Abuse that they are put through.
Contents:
(1) Adams Driveshaft 1310 Heavy Duty Greaseable Series CV Driveshaft made out of 2 inch x.120 Wall Tubing.
(4) Brand New Grade 10 CV Bolts with small heads for easy installation.
Driveshafts come painted Gloss Black Show Quality.
Why Run Adams Forged?
Precision balanced for highway stability
Trail-proven durability
Heavy-duty U-joint construction
Built for lifted and off-road applications
Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Front Driveshaft (1310) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDXJ-1310CVF-S-HVHK
You are buying a Front XJ Cherokee 1310 (Extreme Duty Series) CV Driveshaft made by Adams Driveshaft the Industry Leader in Custom Driveshafts.
Adams Driveshaft custom makes these driveshaft using Only the best components made by two American Companies, Spicer and Neapco. We Start out installing the Strongest Solid Non Greaseable U-joints and use the Strongest castings of Components possible. Then we use D.O.M tubing that we back up with a Lifetime Warranty if you Twist it or Break our Welds.
This Extreme Duty Series Solid Non Greaseable 1310 CV Driveshaft will work up to 38 inch Tall Tire's after that size we Recommend you upgrading to our (Extreme Duty 1350 Spicer Solid Series).
Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.
Why not Buy off of Company that Deals, Wheels, and Builds Driveshafts. As you can see in the Pictures above we Test our Products on our own Jeeps to make sure the parts we are using hold up to the Pressure and Abuse that they are put through.
Contents:
(1) Adams Driveshaft 1310 Extreme Duty Solid Non Greaseable Series CV Driveshaft made out of 2 inch x.120 Wall Tubing.
(4) Brand New Grade 10 CV Bolts with small heads for easy installation.
(1) Free Adams Driveshaft T-Shirt.
Driveshafts come painted Gloss Black Show Quality.
Why Run Adams Forged?
Precision balanced for highway stability
Trail-proven durability
Heavy-duty U-joint construction
Built for lifted and off-road applications
Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep YJ Front Driveshaft (1310) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDYJ-1310SF-S-HVHK
You are buying a Front YJ 1310 Extreme Duty Series Slip and Stub style Driveshaft made by Adams Driveshaft the Industry Leader in Custom Driveshafts.
Adams Driveshaft custom makes these driveshaft using Only the best components made by two American Companies, Spicer and Neapco. We Start out installing the Strongest Solid U-joints and use the Strongest castings of Components possible.
Then we use D.O.M Seamless tubing that we back up with a Lifetime Warranty on our Tubing and Welds if you break them due to torque. Check out the Owners Wife's YJ up in the Pictures it is running the same parts and he really beats it.
This Extreme Duty Series Solid 1310 CV Driveshaft will work up to 37 inch Tall Tire's after that size we Recommend you upgrading to our (Extreme Duty 1350 Solid Series). Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.
Contents:
(1) Adams Driveshaft 1310 Extreme Duty Driveshaft made out of 2 inch x.120 Wall Tubing and 7 inch Long Slip and Stub. Lifetime warranty on the tubing and welds if you break them by torque.
Driveshafts come painted Gloss Black Show Quality.
Why Run Adams Forged?
Precision balanced for highway stability
Trail-proven durability
Heavy-duty U-joint construction
Built for lifted and off-road applications
Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep YJ Front Driveshaft (1310) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDYJ-1310SF-G-HVHK
You are buying a Front YJ 1310 Heavy Duty Series Slip and Stub style Driveshaft made by Adams Driveshaft the Industry Leader in Custom Driveshafts.
Adams Driveshaft custom makes these driveshaft using Only the best components made by two American Companies, Spicer and Neapco. We Start out installing Greaseable U-joints, Long Slip, and use the Strongest castings of Components possible.
Then we use D.O.M Seamless tubing that we back up with a Lifetime Warranty on our Tubing and Welds if you break them due to torque. Check out the TJ Rubicon in the pictures of this item it has the same rear type of driveshaft in it and it has been put through every test possible with out any issues at all.
This Heavy Duty Series Greaseable 1310 CV Driveshaft will work up to 35 inch Tall Tire's after that size we Recommend you upgrading to our (Extreme Duty 1310 Solid Series). Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.
Contents:
(1) Adams Driveshaft 1310 Heavy Duty Driveshaft made out of 2 inch x.120 Wall Tubing and 7 inch Long Slip and Stub.
Lifetime warranty on the tubing and welds if you break them by torque.
Driveshafts come painted Gloss Black Show Quality.
Why Run Adams Forged?
Precision balanced for highway stability
Trail-proven durability
Heavy-duty U-joint construction
Built for lifted and off-road applications
Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Front Driveshaft (1310) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDLJ-1310CVF-G-HVHK
You are buying a Front LJ Non Rubicon 1310 (Heavy Duty Series) CV Driveshaft made by Adams Driveshaft the Industry Leader in Custom Driveshafts.
Adams Driveshaft custom makes these driveshaft using Only the best components made by two American Companies, Spicer and Neapco. We Start out installing Greasable U-joints and use the Strongest castings of Components possible.
Then we use D.O.M Seamless tubing that we back up with a Lifetime Warranty on our Tubing and Welds if you break them due to torque. Check out the TJ Rubicon in the pictures of this item it has the same type of driveshaft in it and it has been put through every test possible with out any issues at all.
This Heavy Duty Series Greasable 1310 CV Driveshaft will work up to 35 inch Tall Tire's after that size we Recommend you upgrading to our (Extreme Duty 1310 Solid Series).
Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.
Contents:
- (1) Adams Driveshaft 1310 Heavy Duty Series CV Driveshaft made out of 2 inch x.120 Wall Tubing.
- (4) Brand New Grade 10 CV Bolts with small heads for easy installation.
- (1) Free Adams Driveshaft T-Shirt.
- Driveshafts come painted Gloss Black Show Quality.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JK Rear Driveshaft (1350) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDJK-1350R-S2D-HVHK
This Extreme Duty Solid 1350 CV Driveshaft will work up to 42 inch Tall Tires. After that you would need to go with our (Insane Duty 1410 Solid U-joint Series) that is coming soon. Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.
This Item will include the following parts:
- (1) 1350 Solid U-joint 2 1/2 inch X .095 Wall Rock Crawler CV Driveshaft. Lifetime Warranty if you twist our Tube or break a Welds due to Torque.
- (1) 1350 Rear Transfer Case Output Shaft Flange Yoke.
- (1) 1350 Rear Dana 44 Pinion Yoke.
- (1) Set of 1350 U-bolts.
- (1) Set of Grade 10 CV Bolts. There is four bolts with small heads so they are easier to install.
- Driveshaft comes painted Gloss Black Show Quality.
Application:
- 2007 to 2018 Jeep JK Wrangler's 2 Door Models up to a 4 inch Lift. These driveshafts are custom made so if you have altered the Rear differential, or transfer case example (Dyna track 60 or Atlas) we can accommodate you. We will just need to know this Information after you have ordered.
Please Note:
- Depending on the size and manufacturer of your lift kit, rear upper adjustable control arms may be needed to help set the pinion angle
- We do know most of the measurements of your JK, but there are some we do not due to the many different size of lifts, and differentials.
- If you have Coil Overs, Rock Krawler brand Lift kit, a Lift Higher that 4.5 inch, have installed a different T-case, or a Different Differential we will need you to get us a measurement.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JK Rear Driveshaft (1310) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDJK-1310R-S4D-HVHK
This Rear Extreme Duty Series Solid 1310 CV Driveshaft will work up to 37 inch Tall Tire's after that size we Recommend you upgrading to our (Extreme Duty 1350 Solid Series). Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.
We do know most of the measurements of your JK up to a 4 1/2 inch lift after that we would need a measurement.
Please note: If you have a Rock Krawler X-Factor Lift Kit or Coil Over Lift Kit we would need you to get us a Measurement after the lift is installed.
Benefits:
- Made out of 2 1/2 inch X .095 Wall D.O.M. tubing that is more than Double the Strength of the Factory Tubing. Lifetime Warranty on the Welds and Tubing if Twisted by Torque.
- Has a Longer Slip n Stub and a Double Lip Seal to help keep out Debris.
- Built only with Components made by Spicer and Neapco.
- Has the Strongest Solid U-joints on the Market.
- Comes with an American Made Transfer Case Yoke with Grade 10 CV Bolts with small heads on them so they are easier to install and a Packet of Loctite.
- Has an American Made Dana 44 Pinion Yoke and Heavy Duty 1310 U-Bolts.
- Driveshaft comes painted Gloss Black Show Quality.
This Item will include the following parts:
- (1) 2 1/2 inch X .095 Wall Heavy Duty 1310 CV Driveshaft with Solid U-joints.
- (1) American Made 1310 Rear Transfer Case Output Shaft Yoke.
- (1) American Made 1310 Rear Dana 44 Pinion Yoke.
- (1) Set of Heavy Duty 1310 U-bolts.
- (1) Set of Grade 10 CV Bolts. There is four bolts total and they have small heads on them so they are easier to install.
Application:
- Fits 2007 Thru 2018 Jeep JK Wranglers 4 Door Models
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JK Rear Driveshaft (1310) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDJK-1310R-G2D-HVHK
This Rear Heavy Duty Series Greasable 1310 CV Driveshaft will work up to 35 inch Tall Tire's after that size we Recommend you upgrading to our (Extreme Duty 1310 Solid Series).
Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.
We do know most of the measurements of your JK up to a 4 1/2 inch lift after that we would need a measurement. Please note: If you have a Rock Krawler X-Factor Lift Kit or Coil Over Lift Kit we would need you to get us a Measurement after the lift is installed.
Benefits:
- 2 Door Driveshaft: Part Number ASDJK-1310R-G2D 4 Door Driveshaft: Part Number ASDJK-1310R-G4D
- Made out of 2 1/2 inch X .083 Wall D.O.M. tubing that is Double the Strength of the Factory Tubing. Lifetime Warranty on the Welds and Tubing if Twisted by Torque.
- Has a Longer Slip n Stub and a Double Lip Seal to help keep out Debris.
- Built only with Components made by Spicer and Neapco.
- Has Greaseable U-joints not Offshore U-joints with different color Seals.
- Comes with an American Made Transfer Case Yoke with Grade 10 CV Bolts with small heads on them so they are easier to install and a Packet of Loctite.
- Has an American Made Dana 44 Pinion Yoke and Heavy Duty 1310 U-Bolts.
- Driveshaft comes painted Gloss Black Show Quality.
This Item will include the following parts:
- (1) 2 1/2 inch X .083 Wall Heavy Duty 1310 CV Driveshaft with Greaseable U-joints.
- (1) American Made 1310 Rear Transfer Case Output Shaft Yoke.
- (1) American Made 1310 Rear Dana 44 Pinion Yoke.
- (1) Set of Heavy Duty 1310 U-bolts.
- (1) Set of Grade 10 CV Bolts. There is four bolts total and they have small heads on them so they are easier to install.
Please Note: Depending on the size and manufacturer of your lift kit, rear upper adjustable control arms may be needed to help set the pinion angle.
Application:
- Fits 2007 Thru 2018 Jeep JK Wranglers 2 Door Models.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JK Rear Driveshaft (1310) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDJK-1310R-G4D-HVHK
This Rear Heavy Duty Series Greasable 1310 CV Driveshaft will work up to 35 inch Tall Tire's after that size we Recommend you upgrading to our (Extreme Duty 1310 Solid Series).
Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.
We do know most of the measurements of your JK up to a 4 1/2 inch lift after that we would need a measurement. Please note: If you have a Rock Krawler X-Factor Lift Kit or Coil Over Lift Kit we would need you to get us a Measurement after the lift is installed.
Benefits:
- 2 Door Driveshaft: Part Number ASDJK-1310R-G2D 4 Door Driveshaft: Part Number ASDJK-1310R-G4D
- Made out of 2 1/2 inch X .083 Wall D.O.M. tubing that is Double the Strength of the Factory Tubing. Lifetime Warranty on the Welds and Tubing if Twisted by Torque.
- Has a Longer Slip n Stub and a Double Lip Seal to help keep out Debris.
- Built only with Components made by Spicer and Neapco.
- Has Greaseable U-joints not Offshore U-joints with different color Seals.
- Comes with an American Made Transfer Case Yoke with Grade 10 CV Bolts with small heads on them so they are easier to install and a Packet of Loctite.
- Has an American Made Dana 44 Pinion Yoke and Heavy Duty 1310 U-Bolts.
- Driveshaft comes painted Gloss Black Show Quality.
This Item will include the following parts:
- (1) 2 1/2 inch X .083 Wall Heavy Duty 1310 CV Driveshaft with Greaseable U-joints.
- (1) American Made 1310 Rear Transfer Case Output Shaft Yoke.
- (1) American Made 1310 Rear Dana 44 Pinion Yoke.
- (1) Set of Heavy Duty 1310 U-bolts.
- (1) Set of Grade 10 CV Bolts. There is four bolts total and they have small heads on them so they are easier to install.
Please Note: Depending on the size and manufacturer of your lift kit, rear upper adjustable control arms may be needed to help set the pinion angle.
Application:
- Fits 2007 Thru 2018 Jeep JK Wranglers 4 Door Models.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JK Rear Driveshaft (1350) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDJK-1350R-G2D-HVHK
This Extreme Duty Solid 1350 CV Driveshaft will work up to 42 inch Tall Tires. After that you would need to go with our (Insane Duty 1410 Solid U-joint Series) that is coming soon. Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.
We do know most of the measurements of your JK, but there are some we do not due to the many different size of lifts, and differentials.
Please Note: If you have Coil Overs, Rock Krawler brand Lift kit, a Lift Higher that 4.5 inch, have installed a different T-case, or a Different Differential we will need you to get us a measurement.
This Item will include the following parts:
- (1) 1350 Greaseable U-joint 2 1/2 inch X .095 Wall Rock Crawler CV Driveshaft. Lifetime Warranty if you twist our Tube or break a Welds due to Torque.
- (1) 1350 Rear Transfer Case Output Shaft Flange Yoke.
- (1) 1350 Rear Dana 44 Pinion Yoke.
- (1) Set of 1350 U-bolts.
- (1) Set of Grade 10 CV Bolts. There is four bolts with small heads so they are easier to install.
- Driveshaft comes painted Gloss Black Show Quality.
Application:
- 2007 to 2018 Jeep JK Wrangler's 2 Door Models up to a 4 inch Lift. These driveshafts are custom made so if you have altered the Rear differential, or transfer case example (Dyna track 60 or Atlas) we can accommodate you. We will just need to know this Information after you have ordered.
Please Note: Depending on the size and manufacturer of your lift kit, rear upper adjustable control arms may be needed to help set the pinion angle.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JK Rear Driveshaft (1350) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDJK-1350R-G4D-HVHK
This Extreme Duty Solid 1350 CV Driveshaft will work up to 42 inch Tall Tires. After that you would need to go with our (Insane Duty 1410 Solid U-joint Series) that is coming soon. Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.
We do know most of the measurements of your JK, but there are some we do not due to the many different size of lifts, and differentials.
Please Note: If you have Coil Overs, Rock Krawler brand Lift kit, a Lift Higher that 4.5 inch, have installed a different T-case, or a Different Differential we will need you to get us a measurement.
This Item will include the following parts:
- (1) 1350 Greaseable U-joint 2 1/2 inch X .095 Wall Rock Crawler CV Driveshaft. Lifetime Warranty if you twist our Tube or break a Welds due to Torque.
- (1) 1350 Rear Transfer Case Output Shaft Flange Yoke.
- (1) 1350 Rear Dana 44 Pinion Yoke.
- (1) Set of 1350 U-bolts.
- (1) Set of Grade 10 CV Bolts. There is four bolts with small heads so they are easier to install.
- Driveshaft comes painted Gloss Black Show Quality.
Application:
- 2007 to 2018 Jeep JK Wrangler's 4 Door Models up to a 4 inch Lift. These driveshafts are custom made so if you have altered the Rear differential, or transfer case example (Dyna track 60 or Atlas) we can accommodate you. We will just need to know this Information after you have ordered.
Please Note: Depending on the size and manufacturer of your lift kit, rear upper adjustable control arms may be needed to help set the pinion angle.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Rear Driveshaft (1350) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDF-PM5002-HVHK
If you have or are getting ready to install a Ford 8.8 Rear Differential in your Offroad Vehicle, then this yoke is a must. This 8.8 Yoke gives you up to 30 degrees depending on how thick your slip yoke is and the Factory Flange only gives you 22 degrees. This yoke has more Angle than any other Yoke on the Market so it can handle more Articulation in Offroad Applications.
This Rear Pinion yoke is the Strongest on the Market and will allow you to install a 1350 Series Driveshaft to the Rear of your Jeep, Etc.
Benefits of this Yoke over Others:
- Adams Manufacture's this Forged Yoke in the U.S.A.
- U-joint Cap area is Machined to Support the cap all the way around.
- The U-joint Cap Retainer/Tab goes half way around the yoke unlike most yokes with 3/8" around.
- Strongest 8.8 Pinion Yoke on the Market.
This Item will come with the Following Parts:
- (1) Forged 8.8 1350 Series Rear Pinion Yoke.
- (1) Set of 1350 Series U-bolts that are made in the U.S.A.
- (1) Packet of Red Threadlocker.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JK Front Driveshaft (1310) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDJK-1310F-S2Y-HVHK
New Front Extreme Duty Jeep JK Wrangler Rubicon or Non Rubicon 1310 CV Driveshaft with Solid U-joints with a Front American Made Pinion yoke.
Why not Buy from a Company that Owns, Lives, and Breathes Offroad vehicles like we do? We Test our Products on our own Jeeps to make sure the parts we are using hold up to the Pressure and Abuse that they are put through.
Application:Fits 2007 thru 2018 Jeep JK WWrangler 2 or 4 Door.
Front Driveshaft Part ASDJK-1310F-S2Y
This Front Extreme Duty Series Solid 1310 CV Driveshaft will work up to 37 inch Tall Tires after that size we Recommend you upgrading to our (Extreme Duty 1350 Solid Non Greaseable Series).
Bigger tires add more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.
We do know most of the measurements of your JK up to a 4 1/2 inch lift after that we would need a measurement.
Please Note: If you have a RockKrawler Lift Kit or Coil Over Lift Kit we would need you to get us a Measurement after the lift is installed.
BeneFits:
- Made out of 2 inch X .120 Wall D.O.M. tubing that is Double the Strength of the Factory Tubing and will clear the exhaust and cross member eliminating damage to the driveshaft at full droop.
- Has Long Full Spline Slip n Stub unlike some of our Competitors.
- Built Only with Components made by Spicer and Neapco.
- Has the Strongest Non Greaseable U-joints on the Market.
- Comes with an American made Heavy Duty Front Pinion Yoke with Heavy Duty 1310 U-bolts.
- Comes with Grade 10 CV Bolts with small heads on them so they are easier to install and a Packet of Loctite.
This Item will include the following parts as Picture up Top:
- (1) 1310 2 inch X .120 Wall Rock Crawler CV Driveshaft with Solid U-joints. Lifetime Warranty if you twist our Tube or break a Weld.
- (1) American Made Front 1310 Transfer Case Output Shaft Yoke.
- (1) American Made Front Dana 30 or Dana 44 Pinion Yoke.
- (1) Set of Heavy Duty U-bolts for front pinion yoke.
- (1) Set of 4 Grade 10 CV Bolts.
- Driveshaft comes painted Gloss Black Show Quality.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JK Front Driveshaft (1310) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDJK-1310F-S-HVHK
New Front Extreme Duty Jeep JK Wrangler Rubicon or Non Rubicon 1310 CV Driveshaft with Solid U-joints Custom made by Adams Driveshaft.
Why not Buy from a Company that Owns, Lives, and Breathes Offroad vehicles like we do? We Test our Products on our own Jeeps to make sure the parts we are using hold up to the Pressure and Abuse that they are put through.
Application:
Fits 2007 thru 2018 Jeep JK Wrangler 2 or 4 Door.
This OEM Front Flange Style Extreme Duty Series Solid 1310 CV Driveshaft will work up to 37 inch Tall Tires after that size we Recommend you upgrading to our (Extreme Duty 1350 Solid Non Greaseable Series).
Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.
We do know most of the measurements of your JK up to a 4 1/2 inch lift after that we would need a measurement.
Please Note: If you have a RockKrawler Lift Kit or Coil Over Lift Kit we would need you to get us a Measurement after the lift is installed.
BeneFits:
- Front Driveshaft Part ASDJK-1310F-S
- Made out of 2 inch X .120 Wall D.O.M. tubing that is Double the Strength of the Factory Tubing and will clear the exhaust and cross member eliminating damage to the driveshaft at full droop.
- Has Long Full Spline Slip n Stub unlike some of our Competitors.
- Built Only with Components made by Spicer and Neapco.
- Has the Strongest Non Greaseable U-joints on the Market.
- Has a Heavy Duty Flange on it that Fits your OEM Pinion Flange so it is Easier to install and you won't need to Disturb the Crush Sleeve.
- Comes with Grade 10 CV Bolts with small heads on them so they are easier to install and a Packet of Loctite.
This Item will include the following parts as Pictured up Top:
- (1) 2 inch X .120 Wall Extreme Duty 1310 CV Driveshaft with Solid Non Greasable U-joints, With a OEM Style Flange. Lifetime Warranty if you twist our tube or break a weld due to Torque.
- (1) American Made Front 1310 Transfer Case Output Shaft Yoke.
- (4) Grade 10 CV bolts.
- Driveshaft comes painted Gloss Black Show Quality.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JK Front Driveshaft (1310) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDJK-1310F-G-HVHK
New Front Heavy Duty Jeep JK Wrangler Rubicon or Non Rubicon 1310 Series CV Driveshaft with Greasable U-joints Custom made by Adams Driveshaft.
Why not Buy from a Company that Owns, Lives, and Breathes Offroad vehicles like we do? We Test our Products on our own Jeeps to make sure the parts we are using hold up to the Pressure and Abuse that they are put through.
Application:
Fits 2007 thru 2018 Jeep JK Wranglers 2 or 4 Door.
This OEM Flange Style Heavy Duty Series Greasable 1310 CV Driveshaft will work up to 35 inch Tall Tires after that size we Recommend you upgrading to our (Extreme Duty 1310 Solid Non Greaseable Series).
Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.
We do know most of the measurements of your JK up to a 4 1/2 inch lift after that we would need a measurement. Please Note: If you have a RockKrawler Lift Kit or Coil Overs we would need you to get us a measurement.
BeneFits:
- Front Driveshaft Part ASDJK-1310F-G
- Made out of 2 inch X .120 Wall D.O.M. tubing that is Double the Strength of the Factory Tubing and will clear the exhaust and cross member eliminating damage to the driveshaft at full droop.
- Has Long Full Spline Slip n Stub unlike some of our Competitors.
- Built Only with Components made by Spicer and Neapco.
- Has the Strongest Greasable U-joints on the Market.
- Has a Heavy Duty Flange on it that Fits your OEM Pinion Flange so it is Easier to install and you won't need to Disturb the Crush Sleeve.
- Comes with Grade 10 CV Bolts with small heads on them so they are easier to install and a Packet of Loctite.
This Item will include the following parts as Pictured up Top:
- (1) 2 inch X .120 Wall Extreme Duty 1310 CV Driveshaft with Greasable U-joints, With a OEM Style Flange. Lifetime Warranty if you twist our tube or break a weld due to Torque.
- (1) American Made Front 1310 Transfer Case Output Shaft Yoke.
- (4) Grade 10 CV bolts.
- Driveshaft comes painted Gloss Black Show Quality.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JK Front Driveshaft (1350) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDJK-1350F-G-HVHK
New Front Heavy Duty Jeep JK Wrangler Rubicon or Non Rubicon 1350 Series CV Driveshaft With Greasable U-joints Custom made by Adams Driveshaft.
Application: 2007 to 2018 Jeep JK Wrangler's 2 or 4 Door Models up to a 4 inch Lift. These driveshafts are custom made so if you have altered the front or rear differentials, or transfer case's example (Dyna track housings, Spicer Ultimate 60's or Atlas Transfer cases) we can accommodate you.
We will just need to know this Information and may have to have you get us a measurement.
We do know most of the measurements of your JK, but there are some we do not due to the many different size of lifts, and differentials.
Please Note: If you have Coil Overs, Rock Krawler brand Lift kit, a Lift Higher that 4.5 inch, have installed a different T-case, or a Different Differential we will need you to get us a measurement.
This Heavy Duty Greasable 1350 CV Driveshaft will work up to 40 inch Tall Tires. Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so if you plan on Beating the Hell out of the Jeep then Our Severe Duty 1350 Series with Solid U-joints are the Strongest Made and your best bet.
Although we offer Heavy Duty series greasable u-joints in our 1350 series driveshafts, our opinion is that the solid Extreme Duty series are a better choice for a few different reasons.
- Strength: Solid u-joints are Not cross drilled (hollow in the middle), so they are much stronger than greasables.
- Reliability/Dependability: Greasable u-joints are not completely sealed, so contaminants from elements (water, dirt, etc) can get into the u-joint and significantly reduce it's life.
- Balancing: Solid u-joints require less weights to balance due to the tighter tolerances when being manufactured.
To Upgrade to solids, click the link below:
This Item will include the following parts:
- (1) 1350 Greasable U-joint 2 inch X .120 Wall Rock Crawler CV Driveshaft. Lifetime Warranty if you twist our Tube or break a Welds.
- (1) 1350 Front Transfer Case Output Shaft Yoke.
- (1) 1350 Front Dana 44 Pinion Yoke.
- (1) Set of Grade 10 CV Bolts. There is four bolts with small heads so they are easier to install.
- (1) Set of 1350 U-Bolts.
- Driveshaft comes painted Gloss Black Show Quality.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep YJ Front Driveshaft (1310) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDYJ-1310CVFC-S-HVHK
You are buying a Front YJ 1310 Extreme Duty Series Conversion CV Driveshaft and Front T-case Yoke with Seal made by Adams Driveshaft the Industry Leader in Custom Driveshafts.
The Factory two u-joint style will usually cause a vibration after you have lifted your YJ from 4 inch and up. This 1310 CV Driveshaft will help the angles so you will not have a vibration.
Adams Driveshaft custom makes these driveshaft using Only the best components made by two American Companies, Spicer and Neapco. We Start out installing the Strongest Solid U-joints and use the Strongest castings of Components possible.
Then we use D.O.M Seamless tubing that we back up with a Lifetime Warranty on our Tubing and Welds if you break them due to torque. Check out the Owners Wife's YJ up in the Pictures it is running the same parts and he really beats it.
This Extreme Duty Series Solid 1310 CV Driveshaft will work up to 37 inch Tall Tire's after that size we Recommend you upgrading to our (Extreme Duty 1350 Solid Series). Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.
Contents:
- (1) Adams Driveshaft 1310 Extreme Duty Driveshaft made out of 2 inch x.120 Wall Tubing and 7 inch Long Slip and Stub. Lifetime warranty on the tubing and welds if you break them by torque.
- (1) Front CV Style T-case Yoke
- (1) Set of Grade 10 CV Bolts with smaller heads for easier install.
- (1) Free Adams Driveshaft T-Shirt.
- Driveshafts come painted Gloss Black Show Quality.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep YJ Front Driveshaft (1310) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDYJ-1310CVFC-G-HVHK
You are buying a Front YJ 1310 Heavy Duty Series Conversion CV Driveshaft and Front T-case Yoke with Seal made by Adams Driveshaft the Industry Leader in Custom Driveshafts.
The Factory two u-joint style will usually cause a vibration after you have lifted your YJ from 4 inch and up. This 1310 CV Driveshaft will help the angles so you will not have a vibration.
Adams Driveshaft custom makes these driveshaft using Only the best components made by two American Companies, Spicer and Neapco. We Start out installing Greasable U-joints, Long Slip, and use the Strongest castings of Components possible.
Then we use D.O.M Seamless tubing that we back up with a Lifetime Warranty on our Tubing and Welds if you break them due to torque. Check out the TJ Rubicon in the pictures of this item it has the same rear type of driveshaft in it and it has been put through every test possible with out any issues at all.
This Heavy Duty Series Greasable 1310 CV Driveshaft will work up to 35 inch Tall Tire's after that size we Recommend you upgrading to our (Extreme Duty 1310 Solid Series).
Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.
Contents:
- (1) Adams Driveshaft 1310 Heavy Duty Driveshaft made out of 2 inch x.120 Wall Tubing and 7 inch Long Slip and Stub.
- Lifetime warranty on the tubing and welds if you break them by torg.
- (1) Front CV Style T-case Yoke
- (1) Set of Grade 10 CV Bolts with smaller heads for easier install.
- (1) Free Adams Driveshaft T-Shirt.
- Driveshafts come painted Gloss Black Show Quality.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep TJ Rear Driveshaft (1310) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDTJ-1310CVR-S-HVHK
You are buying a Rear TJ Non Rubicon 1310 (Extreme Duty Series) CV Driveshaft made by Adams Driveshaft the Industry Leader in Custom Driveshafts.
Part ASDTJ-1310CVR-S Must have an Sye Kit Installed for this Driveshaft to work.
Please notify us if it has a Mega Short SYE, as that will affect the driveshaft length.
Adams Driveshaft custom makes these driveshaft using Only the best components made by two American Companies, Spicer and Neapco.
We Start out installing Solid U-joints, Long Slip, and use the Strongest castings of Components possible. Then we use D.O.M Seamless tubing that we back up with a Lifetime Warranty on our Tubing and Welds if you break them due to torque.
This Extreme Duty Series Solid 1310 CV Driveshaft will work up to 37 inch Tall Tire's after that size we Recommend you upgrading to our (Extreme Duty 1350 Solid Series). Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.
Contents:
- (1) Adams Driveshaft 1310 Solid U-joint Extreme Duty Series CV Driveshaft made out of 2 inch x.120 D.O.M Tubing.
- (4) Brand New Grade 10 CV Bolts with small heads for easy installation.
- (1) Free Adams Driveshaft T-Shirt.
- Driveshafts come painted Gloss Black Show Quality.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Rear Driveshaft (1310) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDXJ-1310CVR-S-HVHK
You are buying a Rear XJ Cherokee 1310 (Extreme Duty Series) CV Driveshaft made by Adams Driveshaft the Industry Leader in Custom Driveshafts.
Part ASDXJ-1310CVR-S Must have an End Yoke Sye Kit Installed for this Driveshaft to work.
Please notify us if it has a Mega Short SYE, as that will affect the driveshaft length.
Adams Driveshaft custom makes these driveshaft using Only the best components made by two American Companies, Spicer and Neapco. We Start out installing Solid Non Greasable U-joints, Long Slip n Stubs, and use the Strongest castings of Components possible. Then we use D.O.M tubing that we back up with a Lifetime Warranty if you Twist it or Break our welds due to Torque. Warranty
This Extreme Duty Series Solid Non Greasable CV Driveshaft will work up to 38 inch Tall Tire's after that size we Recommend you upgrading to our (Severe Duty 1350 Solid Series).
Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc. so you want to make sure you are buying the right driveshaft for your Jeep.
Why not Buy off of Company that Deals, Wheels, and Builds Driveshafts. As you can see in the Pictures above we Test our Products on our own Jeeps to make sure the parts we are using hold up to the Pressure and Abuse that they are put through.
Contents:
- (1) Adams Driveshaft 1310 Solid Non Greasable Extreme Duty Series CV Driveshaft made out of 2 1/2 x .083 Wall D.O.M Tubing.
- We Can make it out of 2 inch x .120 wall if you request at no Extra Charge but Only to Certain lengths for example: 36 inch or Less Center to Center.
- (4) Brand New Grade 10 CV Bolts with small heads for easy installation.
- (1) Free Adams Driveshaft T-Shirt.
- Driveshafts come painted Gloss Black Show Quality.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep YJ Rear Driveshaft (1310) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDYJ-1310CVR-S-HVHK
You are buying a Rear YJ 1310 CV Driveshaft 1988 - 1993 Models Only (Extreme Duty Series) CV Driveshaft made by Adams Driveshaft the Industry Leader in Custom Driveshafts.
Part ASDYJ-1310CVR-S Must have a Yoke Style Sye Kit Installed for this Driveshaft to work.
Please notify us if it has a Mega Short SYE, as that will affect the driveshaft length.
Adams Driveshaft custom makes these driveshaft using Only the best components made by two American Companies, Spicer and Neapco. We Start out installing Solid Non Greasable U-joints, Long Slip n Stub, and use the Strongest castings of Components possible.
Then we use D.O.M tubing that we back up with a Lifetime Warranty if you can possibly twist it by Torque or Break our Welds.
This Extreme Duty Series 1310 CV Solid Non Greasable will work up to 37 inch Tall Tire's after that size we Recommend you upgrading to our (Solid 1350 Severe Duty Series). Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.
Contents:
- (1) Adams Driveshaft 1310 Solid Non Greasable U-joints Xtreme Duty Series CV Driveshaft made out of 2 inch x.120 Wall Tubing.
- (4) Brand New Grade 10 CV Bolts with small heads for easy installation.
- (1) Free Adams Driveshaft T-Shirt.
- Driveshafts come painted Gloss Black Show Quality.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Rear Driveshaft (1310) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDLJ-1310CVR-G-HVHK
You are buying a Rear LJ Non Rubicon 1310 (Heavy Duty Series) CV Driveshaft made by Adams Driveshaft the Industry Leader in Custom Driveshafts.
Part ASDLJ-1310CVR-G Must have an Sye Kit Installed for this Driveshaft to work.
Adams Driveshaft custom makes these driveshaft using Only the best components made by two American Companies, Spicer and Neapco. We Start out installing Greasable U-joints, Long Slip, and use the Strongest castings of Components possible. Then we use D.O.M Seamless tubing that we back up with a Lifetime Warranty on our Tubing and Welds if you break them due to torque.
This Heavy Duty Series Greasable 1310 CV Driveshaft will work up to 35 inch Tall Tire's after that size we Recommend you upgrading to our (Extreme Duty 1310 Solid Series). Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.
Contents:
- (1) Adams Driveshaft 1310 Greasable U-joints Heavy Duty Series CV Driveshaft made out of 2 1/2 inch x.095 Wall Tubing.
- (4) Brand New Grade 10 CV Bolts with small heads for easy installation.
- (1) Free Adams Driveshaft T-Shirt.
- Driveshafts come painted Gloss Black Show Quality.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Rear Driveshaft (1310) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDLJ-1310CVR-S-HVHK
You are buying a Rear LJ Non Rubicon 1310 (Extreme Duty Series) CV Driveshaft made by Adams Driveshaft the Industry Leader in Custom Driveshafts.
Part ASDLJ-1310CVR-S Must have an Sye Kit Installed for this Driveshaft to work.
Adams Driveshaft custom makes these driveshaft using Only the best components made by two American Companies, Spicer and Neapco. We Start out installing Solid U-joints, Long Slip, and use the Strongest castings of Components possible.
Then we use D.O.M Seamless tubing that we back up with a Lifetime Warranty on our Tubing and Welds if you break them due to torque.
This Extreme Duty Series Solid 1310 CV Driveshaft will work up to 37 inch Tall Tire's after that size we Recommend you upgrading to our (Extreme Duty 1350 Solid Series).
Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.
Contents:
- (1) Adams Driveshaft 1310 Solid U-joint Extreme Duty Series CV Driveshaft made out of 2 1/2 inch x.095 D.O.M Tubing.
- (4) Brand New Grade 10 CV Bolts with small heads for easy installation.
- (1) Free Adams Driveshaft T-Shirt.
- Driveshafts come painted Gloss Black Show Quality.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep TJ Rear Driveshaft (1350) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDTJ-1350CVR-SRUB-HVHK
You are Buying a Rear (Extreme Duty Series) 1350 series CV Driveshaft with Solid U-joints for a TJ Rubicon made by Adams Driveshaft the Industry leader in Custom made Driveshafts.
Adams Driveshaft custom makes these driveshaft using Only the best components made by two American Companies Spicer and Neapco. We Start out installing the Strongest made Solid U-joints, Strongest CV Flange, and the Strongest castings of Components possible.
Then we use D.O.M Seamless tubing that we back up with a Lifetime Warranty on our welds and Tubing if you break them due to torque. Check out the TJ Rubicon in the pictures of this item it has the same rear type of driveshaft in it and it has been put through every test possible without any issues at all.
Due to different sizes of Lifts, Belly Up's, and Stretches, we will need you to give us a Flat to Center measurement off of your TJ.
Components:
- (1) Extreme Duty Solid U-joint 1350 CV and 1330 Rear Driveshaft.
- (1) You will also receive an Adams Driveshaft T-shirt with your purchase.
- Driveshafts come painted Gloss Black Show Quality.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Rear Driveshaft (1350) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDLJ-1350CVR-SRUB-HVHK
You are Buying a Rear (Extreme Duty Series) 1350 series Solid CV Driveshaft for an LJ Rubicon made by Adams Driveshaft the Industry leader in Custom made Driveshafts.
Adams Driveshaft custom makes these driveshaft using Only the best components made by two American Companies Spicer and Neapco. We Start out installing the Strongest made Solid U-joints, Strongest CV Flange, and the Strongest castings of Components possible.
Then we use D.O.M Seamless tubing that we back up with a Lifetime Warranty on our welds and Tubing if you break them due to torque. Check out the LJ Rubicon in the pictures of this item it has the same rear type of driveshaft in it and it has been put through every test possible without any issues at all.
Due to different sizes of Lifts, Belly Up's, and Stretches, we will need you to give us a Flat to Center measurement off of your LJ. We have attached a measurement chart below that shows you how to measure. Please measure with the Jeep sitting on the ground at Ride Height.
Components:
- (1) Extreme Duty Solid U-joint 1350 CV and 1330 Rear Driveshaft.
- (1) You will also receive an Adams Driveshaft T-shirt with your purchase.
- Driveshafts come painted Gloss Black Show Quality
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Front Driveshaft (1330) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDLJ-1330CVF-SRUB-HVHK
You are buying a Front LJ (Rubicon) 1330 Rock Crawler (Extreme Duty Series) CV Driveshaft made by Adams Driveshaft the Industry Leader in Custom Driveshafts.
Contents:
- (1) Adams Driveshaft 1330 Rock Crawler CV Driveshaft made out of 2 inch x.120 Wall D.O.M. Tubing and with Solid U-joints.
- (4) Brand New Grade 10 CV Bolts.
- (1) Free Adams Driveshaft T-Shirt. Sizes to choose from: M, L, XL, XXL, XXXL, XXXXL
- Driveshafts come painted Gloss Black Show Quality.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JK Front Driveshaft (1350) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDJK-1350F-S-OEM-HVHK
New Front Extreme Duty Jeep JK Wrangler Rubicon or Non Rubicon OEM Flange Style 1350 Series CV Driveshaft With Solid U-joints Custom made by Adams Driveshaft.
Application: 2007 to 2018 Jeep JK Wrangler's 2 or 4 Door Models up to a 4.5 inch Lift. The reason this driveshaft is Called O.E.M Style is because it comes with a flange on the Front Slip Yoke that will bolt to your existing front factory pinion flange making it Easier for you to Install.
These driveshafts are custom made so if you have altered the front or rear differentials, or transfer cases example (Dyna track housings, or Atlas Transfer cases) we can accommodate you we would just need to know this Information and may need you to get us a measurement.
We do know most of the measurements of your JK, but there are some we do not due to the many different size of lifts, T-case Swaps, and differential Swaps.
Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep. This Extreme Duty Solid 1350 CV Driveshaft will work up to 42 inch Tall Tires.
This Item will include the following parts:
- (1) 1350 Solid Non Greasable U-joint 2 inch X .120 Wall Rock Crawler CV Driveshaft. Lifetime Warranty if you twist our Tube by Torque or break a Welds.
- (1) 1350 Front Transfer Case Output Shaft Yoke.
- (1) Set of Grade 10 CV Bolts. There is four bolts with small heads so they are easier to install.
- Driveshaft comes painted Gloss Black Show Quality.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep TJ Rear Driveshaft (1310) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDTJ-1310CVR-SRUB-HVHK
You are Buying a Rear (Heavy Duty Series) 1310 Rubicon Flange Style CV Driveshaft with Solid U-joints for a TJ Rubicon made by Adams Driveshaft the Industry leader in Custom made Driveshafts.
Adams Driveshaft custom makes these driveshaft using Only the best components made by two American Companies Spicer and Neapco. We Start out installing the Strongest made Solid U-joints, Strongest CV Flange, and the Strongest castings of Components possible.
Then we use D.O.M Seamless tubing that we back up with a Lifetime Warranty on our welds and Tubing if you break them due to torque. Check out the TJ Rubicon in the pictures of this item it has the same rear type of driveshaft in it and it has been put through every test possible without any issues at all.
This OEM Flange Style Heavy Duty Series Solid 1310 Series CV Driveshaft will work up to 35 inch Tall Tires and Mild Wheeling. after that size we Recommend you upgrading to our (Extreme Duty 1350 Solid Non Greaseable Series).
Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.
Due to different sizes of Lifts, Belly Up's, and Stretches, we will need you to give us a Flat to Center measurement off of your TJ.
Components:
- (1) Extreme Duty Solid U-joint 1310 CV and 1330 Rear Driveshaft.
- (1) You will also receive an Adams Driveshaft T-shirt with your purchase.
- Driveshafts come painted Gloss Black Show Quality.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Rear Driveshaft (1310) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDLJ-1310CVR-SRUB-HVHK
You are Buying a Rear (Heavy Duty Series) 1310 Rubicon Flange Style CV Driveshaft with Solid U-joints for a LJ Rubicon made by Adams Driveshaft the Industry leader in Custom made Driveshafts.
Adams Driveshaft custom makes these driveshaft using Only the best components made by two American Companies Spicer and Neapco. We Start out installing the Strongest made Solid U-joints, Strongest CV Flange, and the Strongest castings of Components possible.
Then we use D.O.M Seamless tubing that we back up with a Lifetime Warranty on our welds and Tubing if you break them due to torque. Check out the TJ Rubicon in the pictures of this item it has the same rear type of driveshaft in it and it has been put through every test possible without any issues at all.
This OEM Flange Style Heavy Duty Series Solid 1310 Series CV Driveshaft will work up to 35 inch Tall Tires and Mild Wheeling. after that size we Recommend you upgrading to our (Extreme Duty 1350 Solid Non Greaseable Series).
Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.
Due to different sizes of Lifts, Belly Up's, and Stretches, we will need you to give us a Flat to Center measurement off of your LJ. Please measure with the Jeep sitting on the ground at Ride Height.
Components:
- (1) Extreme Duty Solid U-joint 1310 CV and 1330 Rear Driveshaft.
- (1) You will also receive an Adams Driveshaft T-shirt with your purchase.
- Driveshafts come painted Gloss Black Show Quality.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JL Front Driveshaft (1350) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDFFJL-PMCV01-HVHK
Adams Driveshaft FORGED Jeep JL Wrangler Front 1350 Series Half Round CV Transfer Case Yoke. This FORGED Transfer Case Yoke is the Strongest on the Market and will allow you to install a 1350 Series Half Round CV Driveshaft to the Front of your Jeep JL Wrangler without rubbing on the Transmission Heater that is bolted on the side of the transmission.
This Item will come with the Following Parts:
- (1) Forged JL Front 1350 Series CV T-case Yoke.
- (4) Grade 10 CV Bolts with smaller Heads for easier Installation.
- (1) Pack of Red Threadlocker.
- Yoke may come in Silver, or Black.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JL Front Driveshaft (1310) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDFFJL-PMCV03-HVHK
Adams Driveshaft Forged Jeep JL Wrangler Front 1310 Series CV Half Round Transfer Case Yoke. This FORGED Transfer Case Yoke is the Strongest on the Market and will allow you to install a 1310 Series Half Round CV Driveshaft to the Front of your Jeep JL Wrangler.
This Item will come with the Following Parts:
- (1) Forged Front JL 1310 Series CV T-case Yoke.
- (4) Grade 10 CV Bolts with smaller Heads for easier Installation.
- (1) Pack of Red Threadlocker.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JL Rear Driveshaft (1350) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDFRJL-PMCV01-HVHK
Adams Driveshaft FORGED Jeep JL Wrangler Rear 1350 Series Half Round CV Transfer Case Yoke.
This FORGED Transfer Case Yoke is the Strongest on the Market and will allow you to install a 1350 Series Half Round CV Driveshaft to the Rear of your Jeep JL Wrangler without rubbing on the Transmission Heater that is bolted on the side of the transmission.
This Item will come with the Following Parts:
- (1) Forged JL Rear 1350 Series CV T-case Yoke.
- (4) Grade 10 CV Bolts with smaller Heads for easier Installation.
- (1) Pack of Red Threadlocker.
- Yoke may come in Black, or Silver.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JK Front Driveshaft (1310) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDFFJK-PMCV03-HVHK
Adams Driveshaft FORGED Jeep JK Wrangler Front 1310 Series Half Round Transfer Case Yoke. This FORGED Transfer Case Yoke is the Strongest on the Market and will allow you to install a 1310 Series Half Round CV Driveshaft to the Front of your Jeep JK Wrangler.
This Item will come with the Following Parts:
- (1) JK Forged 1310 Series CV Half Round T-case Yoke.
- (4) Grade 10 CV Bolts with smaller Heads for easier Installation.
- (1) Pack of Red Threadlocker.
- Yoke may come in Black or Silver.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JK Front Driveshaft (1350) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDFFJK-PMCV01-HVHK
Adams Driveshaft FORGED Jeep JK Wrangler Front 1350 Series Half Round CV Transfer Case Yoke. This FORGED Transfer Case Yoke is the Strongest on the Market and will allow you to install a 1350 Series Half Round CV Driveshaft to the Front of your Jeep JK Wrangler.
This Item will come with the Following Parts:
- (1) JK Forged Front 1350 Series Half Round CV T-case Yoke.
- (4) Grade 10 CV Bolts with smaller Heads for easier Installation.
- (1) Pack of Red Threadlocker.
- Yoke may come in Silver or Black.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JK Rear Driveshaft (1350) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDFRJK-PMCV01-HVHK
Adams Driveshaft FORGED Jeep JK Wrangler Rear 1350 Series Half Round CV Transfer Case Yoke. This FORGED Transfer Case Yoke is the Strongest on the Market and will allow you to install a 1350 Series Half Round CV Driveshaft to the Rear of your Jeep JK Wrangler.
This Item will come with the Following Parts:
- (1) JK Forged Rear 1350 Series Half Round CV T-case Yoke.
- (4) Grade 10 CV Bolts with smaller Heads for easier Installation.
- (1) Pack of Red Threadlocker.
- Yoke may come in Silver or Black.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JK Rear Driveshaft (1310) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDFRJK-PMCV03-HVHK
Adams Driveshaft FORGED Jeep JK Wrangler Rear 1310 Series Half Round Transfer Case Yoke. This FORGED Transfer Case Yoke is the Strongest on the Market and will allow you to install a 1310 Series Half Round CV Driveshaft to the Rear of your Jeep JK Wrangler Transfer Case.
This Item will come with the Following Parts:
- (1) JK Forged 1310 Series CV T-case Yoke.
- (4) Grade 10 CV Bolts with smaller Heads for easier Installation.
- (1) Pack of Red Threadlocker.
- Yoke may come in Black or Silver.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JK Rear Driveshaft (1350) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDFRJK-PM4500-HVHK
Adams Driveshaft FORGED Jeep JK Wrangler Rear 1350 Series CV Transfer Case Flange Yoke. This FORGED Transfer Case Yoke is the Strongest on the Market and will allow you to install a 1350 Series Flange Style CV Driveshaft to the Rear of your Jeep JK Wrangler.
This Item will come with the Following Parts:
- (1) JK Forged Rear 1350 Series CV Flange T-case Yoke.
- (4) Grade 10 CV Bolts with smaller Heads for easier Installation.
- (1) Pack of Red Threadlocker.
- Yoke may come in Silver or Black.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JK Front Driveshaft (1350) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDFFJK-PM4600-HVHK
Adams Driveshaft FORGED Jeep JK Wrangler Front 1350 Series Transfer Case Flange Yoke. This FORGED Transfer Case Yoke is the Strongest on the Market will allow you to install a 1350 Series Flange Style CV Driveshaft to the Front of your Jeep JK Wrangler.
This Item will come with the Following Parts:
- (1) Forged JK Front 1350 Series Flange T-case Yoke.
- (4) Grade 10 CV Bolts with smaller Heads for easier Installation.
- (1) Pack of Red Threadlocker.
- Yoke may come in Black or Silver.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JL Rear Driveshaft (1350) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDJLR-PM4700-SAG-HVHK
Adams Driveshaft FORGED Jeep JL Wrangler Rear 1350 Series Transfer Case Flange Yoke Saginaw Pattern. This FORGED Transfer Case Flange Yoke is the Strongest on the Market and will allow you to install a 1350 Series Sag Pattern Flange Style CV Driveshaft to the Rear of your Jeep JL Wrangler.
This Item will come with the Following Parts:
- (1) Forged JL Rear 1350 Series Sag Pattern Flange T-case Yoke.
- (4) Grade 10 CV Bolts with smaller Heads for easier Installation.
- (1) Pack of Red Threadlocker.
- Flange may come is Silver or Black.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JL Rear Driveshaft (1350) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDFRJL-PM5001-RUB-HVHK
Adams Driveshaft FORGED Jeep JL Wrangler Rear 1350 Series U-Bolt Style Pinion Yoke for a JL Rubicon Only. This FORGED Pinion Yoke is the Strongest on the Market and will allow you to install a 1350 Series Driveshaft to the Rear of your Jeep JL Wrangler with Factory Rubicon Dana 44 AdvanTEK
BeneFits of this Yoke over Others:
- Adams manufactures this FORGED Yoke here in the U.S.A.
- U-joint Cap area is Machined to Support the cap half way around.
- The U-joint Cap Retainer/Tab goes half way around the yoke unlike most yokes with 3/8 inch around.
This Item will come with the Following Parts:
- (1) JL FORGED 1350 Series Rear Pinion Yoke.
- (1) Set of 1350 Series U-bolts.
- (1) Packet of Threadlocker.
- Yoke may come in Silver, or Gold Zink Coating.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JK Rear Driveshaft (1310) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDFRJK-PM1003-HVHK
Adams Driveshaft FORGED Jeep JK Wrangler Rear 1310 Series U-Bolt Style Pinion Yoke for Rubicon and Non Rubicon. This FORGED Pinion yoke is the Strongest on the Market and will allow you to install a 1310 Series CV Driveshaft to the Rear of your Jeep Jk Wrangler with Factory Rubicon or Non Rubicon Dana 44.
BeneFits of Buying this Yoke over Others:
- Adams makes this FORGED here in the U.S.A.
- Seal Surface is Hardened and is same size as Factory unlike others so it is direct replacement.
This Item will come with the Following Parts:
- (1) Jk FORGED rear 1310 Series Pinion Yoke.
- (1) Set of 1310 Series U-bolts.
- (1) Packet of Red Threadlocker.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JK Rear Driveshaft (1350) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDFRJK-PM5004-HVHK
Adams Driveshaft Forged Jeep JK Wrangler Rear 1350 Series U-Bolt Style Pinion Yoke for Rubicon and Non Rubicon.
This FORGED Pinion yoke is the Strongest on the Market and will allow you to install a 1350 Series U-joint to the Rear of your Jeep Jk Wrangler with Factory Rubicon or Non Rubicon Dana 44.
BeneFits of Buying this Yoke over Others:
- Adams has this Yoke FORGED here in the U.S.A.
- Seal Surface is Hardened and is the same size as Factory unlike others so it is direct replacement.
This Item will come with the Following Parts:
- (1) Jk FORGED Rear 1350 Series Pinion Yoke.
- (1) Set of 1350 Series U-bolts.
- (1) Packet of Red Threadlocker
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JK Front Driveshaft (1350) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDFFJK-PM5003-HVHK
Adams Driveshaft FORGED Front Jeep JK Wrangler 1350 Series U-Bolt Style Pinion Yoke for Rubicon and Non Rubicon. This FORGED Pinion yoke is the Strongest on the Market and will allow you to install a 1350 Series U-joint to the Front of your Jeep Jk Wrangler with Factory Rubicon Dana 44 or Non Rubicon Dana 30.
BeneFits of Buying this Yoke over Others:
- Adams Manufactures this FORGED Yoke in the U.S.A.
- Seal Surface is HARDENED and is same size as Factory unlike others so it is direct replacement.
This Item will come with the Following Parts:
- (1) JK Front FORGED JK 1350 Series Pinion Yoke.
- (1) Set of 1350 Series U-bolts.
- (1) Packet of Red Threadlocker
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep YJ Rear Driveshaft (1310) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDYJ-1310CV1330R-S-HVHK
You are buying a Rear YJ 1310 For 1994 and 1995 Models Only (Extreme Duty Series) CV Driveshaft made by Adams Driveshaft the Industry Leader in Custom Driveshafts.
Part ASDYJ-1310CV1330R-S Must have a Yoke Style Sye Kit Installed for this Driveshaft to work.
Please notify us if it has a Mega Short SYE, as that will affect the driveshaft length.
Adams Driveshaft custom makes these driveshaft using Only the best components made by two American Companies, Spicer and Neapco. We Start out installing Solid Non Greasable U-joints, Long Slip n Stub, and use the Strongest castings of Components possible.
Then we use D.O.M tubing that we back up with a Lifetime Warranty if you can possibly twist it by Torque or Break our Welds.
This Extreme Duty Series 1310 CV Solid Non Greasable comes with a 1330 series u-joint at the axle for 1994 and 1995 Models and will work up to 37 inch Tall Tire's after that size we Recommend you upgrading to our (Solid 1350 Severe Duty Series).
Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.
Contents:
- (1) Adams Driveshaft 1310 Solid Non Greasable U-joints Extreme Duty Series CV Driveshaft made out of 2 inch x.120 Wall Tubing.
- (4) Brand New Grade 10 CV Bolts with small heads for easy installation.
- (1) Free Adams Driveshaft T-Shirt.
- Driveshafts come painted Gloss Black Show Quality.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep YJ Rear Driveshaft (1310) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDYJ-1310CV1330R-G-HVHK
You are buying a Rear YJ 1310 For 1994 and 1995 Models Only (Heavy Duty Series) CV Driveshaft made by Adams Driveshaft the Industry Leader in Custom Driveshafts.
Part ASDYJ-1310CV1330R-G Must have a Yoke Style Sye Kit Installed for this Driveshaft to work.
Please notify us if it has a Mega Short SYE, as that will affect the driveshaft length.
Adams Driveshaft custom makes these driveshaft using Only the best components made by two American Companies, Spicer and Neapco. We Start out installing Greasable U-joints, Long Slip n Stub, and use the Strongest castings of Components possible. Then we use D.O.M tubing that we back up with a Lifetime Warranty if you can possibly twist it by Torque or Break our Welds.
This Heavy Duty Series Greasable 1310 CV Driveshaft comes with a 1330 series u-joint at the axle for 1994 and 1995 Models and will work up to 35 inch Tall Tire's after that size we Recommend you upgrading to our (Extreme Duty 1310 Spicer Solid Series).
Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.
Contents:
- (1) Adams Driveshaft 1310 Greasable U-joints Heavy Duty Series CV Driveshaft made out of 2 inch x.120 Wall Tubing.
- (4) Brand New Grade 10 CV Bolts with small heads for easy installation.
- (1) Free Adams Driveshaft T-Shirt.
- Driveshafts come painted Gloss Black Show Quality.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JK Front Driveshaft (1310) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDFFJK-PM1002-HVHK
Adams Driveshaft FORGED Jeep JK Wrangler Front 1310 Series U-Bolt Style Pinion Yoke for Dana 30 or Dana 44 Rubicon, or Non Rubicon.
This FORGED Yoke is the Strongest Pinion yoke on the Market and will allow you to install a 1310 Series U-joint to the Front of your Jeep Jk Wrangler with Factory Rubicon Dana 44 or Non Rubicon Dana 30.
BeneFits of Buying this Yoke over Others:
- Adams manufactures this FORGED Yoke in the U.S.A.
- U-bolts are Made in the U.S.A
- Seal Surface is Hardended and is the same size as Factory unlike others so it is a direct replacement.
This Item will come with the Following Parts:
- (1) Jk Front FORGED 1310 Series Pinion Yoke.
- (1) Set of 1310 Series U-bolts.
- (1) Packet of ThreadLocker.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JT Gladiator Front Driveshaft (1310) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDFJT-PMCV03-HVHK
Adams Driveshaft Forged Jeep JT Wrangler Front 1310 Series Half Round Transfer Case Yoke.
This FORGED Transfer Case CV Yoke is the Strongest on the Market and will allow you to install a 1310 Series Half Round CV Driveshaft to the Front of your Jeep JT Gladiator.
This Item will come with the Following Parts:
- (1) JT Forged Front 1310 Series CV T-case Yoke.
- (4) Grade 10 CV Bolts with smaller Heads for easier Installation.
- (1) Pack of Red Threadlocker.
- Yoke may come in Silver or Black.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JT Gladiator Front Driveshaft (1350) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDFJTF-PMCV01-HVHK
Adams Forged Jeep JT Gladiator Front 1350 Series Half Round CV Transfer Case Yoke. This FORGED Transfer Case Yoke is the Strongest on the Market and will allow you to install a 1350 Series Half Round CV Driveshaft to the Front of your Jeep JT Gladiator without rubbing on the Transmission Linkage that is bolted on the side of the transmission.
This Item will come with the Following Parts:
- (1) JT Forged 1350 Series Half Round Front T-case Yoke.
- (4) Grade 10 CV Bolts with smaller Heads for easier Installation.
- (1) Pack of Red Threadlocker.
- Yoke may come in Black, or Silver
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JT Gladiator Rear Driveshaft (1350) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDFJTR-PM4700-SAG-HVHK
Adams Driveshaft Forged Jeep JT Wrangler Rear 1350 Series Transfer Case Flange Yoke. This FORGED Transfer Case Flange Yoke is the Strongest on the Market and will allow you to install a 1350 Series Flange Style CV Driveshaft with a 3.125 Pilot to the Rear of your Jeep JT.
This Item will come with the Following Parts:
- (1) JT Rear Forged 1350 Series Flange T-case Yoke with a 3.125 Pilot (SAG PATTERN) and a 4.25 inch across Bolt Pattern.
- (4) Grade 10 CV Bolts with smaller Heads for easier Installation.
- (1) Pack of Red Threadlocker.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JT Gladiator Rear Driveshaft (1350) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDFJTR-PMCV01-HVHK
Adams Driveshaft Forged Jeep JT Front 1350 Series Half Round Transfer Case Yoke. This FORGED Transfer Case Yoke is the Strongest on the Market and will allow you to install a 1350 Series Half Round CV Driveshaft to the Rear of your Jeep JT without rubbing on the Transmission Linkage that is bolted on the side of the transmission.
This Item will come with the Following Parts:
- (1) JT Rear Forged 1350 Series Half Round T-case Yoke.
- (4) Grade 10 CV Bolts with smaller Heads for easier Installation.
- (1) Pack of Red Threadlocker.
- Yoke may come in Silver or Black
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JT Gladiator Front Driveshaft (1350) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDFJT-PM5001-1-HVHK
Adams Forged Jeep JT Gladiator Front 1350 Series U-Bolt Style Pinion Yoke for a JT Rubicon Only. This Front Pinion yoke is the Strongest on the Market and will allow you to install a 1350 Series Driveshaft to the Front of your Jeep JT Gladiator with Factory Rubicon Dana 44 AdvanTEK
BeneFits of this Yoke over Others:
- Adams Manufacture's this Forged Yoke in the U.S.A.
- U-joint Cap area is Machined to Support the cap all the way around.
- The U-joint Cap Retainer/Tab goes half way around the yoke unlike most yokes with 3/8 inch around.
- Strongest JT Pinion Yoke on the Market.
This Item will come with the Following Parts:
- (1) Forged JT 1350 Series Front Pinion Yoke (Rubicon Only).
- (1) Set of 1350 Series U-bolts that are made in the U.S.A.
- (1) Packet of Red Threadlocker.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JT Gladiator Rear Driveshaft (1350) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDFJTR-PM4500-HVHK
Adams Forged Jeep JT Rear 1350 Series Transfer Case Flange Yoke with a Ford 2 inch Pilot and 4 1/4 inch Bolt Pattern.
This FORGED Transfer Case Flange Yoke is one of the Strongest on the Market will allow you to install a 1350 Series Flange Style CV Driveshaft to the Rear of your Jeep JK Wrangler.
This Item will come with the Following Parts:
- (1) JK Rear Forged 1350 Series Flange T-case Yoke with a 2 inch Pilot and a 4 1/4 inch Bolt Pattern.
- (4) Grade 10 CV Bolts with smaller Heads for easier Installation.
- (1) Pack of Red Threadlocker.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JT Gladiator Rear Driveshaft (1350) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDRJT-PM5006-OVR-HVHK
Adams Driveshaft FORGED Jeep JT Gladiator Rear 1350 Series U-Bolt Style Pinion Yoke for an JT Overland with a M200 Rear Differential.
This FORGED Pinion yoke is the Strongest on the Market and will allow you to install a 1350 Series Driveshaft to the Rear of your Jeep JT Gladiator with a Factory M200 Differential.
BeneFits of this Yoke over Others:
- Adams manufactures this FORGED Yoke here in the U.S.A.
- The U-joint Cap Retainer/Tab goes half way around the yoke unlike most yokes with 3/8 inch around.
- Strongest JT Pinion Yoke on the Market.
This Item will come with the Following Parts:
- (1) JT FORGED M200 1350 Series Rear Pinion Yoke.
- (1) Set of 1350 Series U-bolts.
- (1) Packet of Threadlocker.
Before buying this yoke please confirm That You have an M200 Rear Differential. There are two different options Depending on how the vehicle was ordered or built.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JT Gladiator Rear Driveshaft (1350) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDRJT-PM5006-SP-HVHK
Adams Driveshaft FORGED Jeep JT Wrangler Rear 1350 Series U-Bolt Style Pinion Yoke for a JT Sport with an M200 Rear Differential.
This FORGED Pinion yoke is the Strongest on the Market and will allow you to install a 1350 Series Driveshaft to the Rear of your Jeep JT Wrangler Sport with a Factory M200 Differential.
BeneFits of this Yoke over Others:
- Adams manufactures this FORGED Yoke here in the U.S.A.
- The U-joint Cap Retainer/Tab goes half way around the yoke unlike most yokes with 3/8 inch around.
- Strongest JT Pinion Yoke on the Market.
This Item will come with the Following Parts:
- (1) JT FORGED M200 1350 Series Rear Pinion Yoke.
- (1) Set of 1350 Series U-bolts.
- (1) Packet of Threadlocker.
Before buying this yoke please confirm That You have an M200 Rear Differential. There are two different options Depending on how the vehicle was ordered or built
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JT Gladiator Rear Driveshaft (1350) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDRJT-PM5006-SA-HVHK
Adams Driveshaft FORGED Jeep JT Gladiator Rear 1350 Series U-Bolt Style Pinion Yoke for a JT Sahara with an M200 Rear Differential.
This FORGED Pinion yoke is the Strongest on the Market and will allow you to install a 1350 Series Driveshaft to the Rear of your Jeep JT Gladiator with a Factory M200 Differential.
BeneFits of this Yoke over Others:
- Adams manufactures this FORGED Yoke here in the U.S.A.
- The U-joint Cap Retainer/Tab goes half way around the yoke unlike most yokes with 3/8 inch around.
- Strongest JT Pinion Yoke on the Market.
This Item will come with the Following Parts:
- (1) JT FORGED M200 1350 Series Rear Pinion Yoke.
- (1) Set of 1350 Series U-bolts.
- (1) Packet of Threadlocker.
Before buying this yoke please confirm That You have an M200 Rear Differential. There are two different options Depending on how the vehicle was ordered or built.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JT Gladiator Rear Driveshaft (1350) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDRJT-PM5007-SA-HVHK
Adams Driveshaft FORGED Jeep JT Wrangler Rear 1350 Series U-Bolt Style Pinion Yoke for a JT Sahara with an M220 Rear Differential. This FORGED Pinion yoke is the Strongest on the Market and will allow you to install a 1350 Series Driveshaft to the Rear of your Jeep JT Gladiator with a Factory M220 Differential.
BeneFits of this Yoke over Others:
- Adams manufactures this FORGED Yoke here in the U.S.A.
- The U-joint Cap Retainer/Tab goes half way around the yoke unlike most yokes with 3/8 inch around.
- Strongest JT Pinion Yoke on the Market.
This Item will come with the Following Parts:
- (1) JT FORGED M220 1350 Series Rear Pinion Yoke.
- (1) Set of 1350 Series U-bolts.
- (1) Packet of Threadlocker.
Before buying this yoke please confirm that you have an M220 Rear Differential. There are two different options Depending on how the vehicle was ordered or built..
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JT Gladiator Rear Driveshaft (1350) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDRJT-PM5007-SP-HVHK
Adams Driveshaft FORGED Jeep JT Gladiator Rear 1350 Series U-Bolt Style Pinion Yoke for a JT Sport with an M220 Rear Differential.
This FORGED Pinion yoke is the Strongest on the Market and will allow you to install a 1350 Series Driveshaft to the Rear of your Jeep JT Gladiator with a Factory M220 Differential.
BeneFits of this Yoke over Others:
- Adams manufactures this FORGED Yoke here in the U.S.A.
- The U-joint Cap Retainer/Tab goes half way around the yoke unlike most yokes with 3/8 inch around.
- Strongest JT Pinion Yoke on the Market.
This Item will come with the Following Parts:
- (1) JT FORGED M220 1350 Series Rear Pinion Yoke.
- (1) Set of 1350 Series U-bolts.
- (1) Packet of Threadlocker.
Before buying this yoke please confirm that you have an M220 Rear Differential. There are two different options Depending on how the vehicle was ordered or built.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JT Gladiator Rear Driveshaft (1350) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDRJT-PM5007-OVR-HVHK
Adams Driveshaft FORGED Jeep JT Gladiator Rear 1350 Series U-Bolt Style Pinion Yoke for a JT Overland with an M220 Rear Differential.
This FORGED Pinion yoke is the Strongest on the Market and will allow you to install a 1350 Series Driveshaft to the Rear of your Jeep JT Gladiator with a Factory M220 Differential.
BeneFits of this Yoke over Others:
- Adams manufactures this FORGED Yoke here in the U.S.A.
- The U-joint Cap Retainer/Tab goes half way around the yoke unlike most yokes with 3/8 inch around.
- Strongest JT Pinion Yoke on the Market.
This Item will come with the Following Parts:
- (1) JT FORGED M220 1350 Series Rear Pinion Yoke.
- (1) Set of 1350 Series U-bolts.
- (1) Packet of Threadlocker.
Before buying this yoke please confirm that you have an M220 Rear Differential. There are two different options Depending on how the vehicle was ordered or built
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JL Rear Driveshaft (1350) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDRJL-PM5007-SP-HVHK
Adams Driveshaft FORGED Jeep JL Gladiator Rear 1350 Series U-Bolt Style Pinion Yoke for a JL Sport with an M220 Rear Differential.
This FORGED Pinion yoke is the Strongest on the Market and will allow you to install a 1350 Series Driveshaft to the Rear of your Jeep JL Wrangler with a Factory M220 Differential.
BeneFits of this Yoke over Others:
- Adams manufactures this FORGED Yoke here in the U.S.A.
- The U-joint Cap Retainer/Tab goes half way around the yoke unlike most yokes with 3/8 inch around.
- Strongest JL Pinion Yoke on the Market.
This Item will come with the Following Parts:
- (1) JL FORGED M220 1350 Series Rear Pinion Yoke.
- (1) Set of 1350 Series U-bolts.
- (1) Packet of Threadlocker.
Before buying this yoke please confirm that you have an M220 Rear Differential. There are two different options Depending on how the vehicle was ordered or built
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JL Rear Driveshaft (1350) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDRJL-PM5007-SA-HVHK
Adams Driveshaft FORGED Jeep JL Wrangler Rear 1350 Series U-Bolt Style Pinion Yoke for a JL Sahara with an M220 Rear Differential.
This FORGED Pinion yoke is the Strongest on the Market and will allow you to install a 1350 Series Driveshaft to the Rear of your Jeep JL Wrangler with a Factory M220 Differential.
BeneFits of this Yoke over Others:
- Adams manufactures this FORGED Yoke here in the U.S.A.
- The U-joint Cap Retainer/Tab goes half way around the yoke unlike most yokes with 3/8 inch around.
- Strongest JL Pinion Yoke on the Market.
This Item will come with the Following Parts:
- (1) JL FORGED M220 1350 Series Rear Pinion Yoke.
- (1) Set of 1350 Series U-bolts.
- (1) Packet of Threadlocker.
Before buying this yoke please confirm that you have an M220 Rear Differential. There are two different options Depending on how the vehicle was ordered or built
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JL Rear Driveshaft (1350) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDRJL-PM5006-SP-HVHK
Adams Driveshaft FORGED Jeep JL Wrangler Rear 1350 Series U-Bolt Style Pinion Yoke for a JL Sport with an M200 Rear Differential.
This FORGED Pinion yoke is the Strongest on the Market and will allow you to install a 1350 Series Driveshaft to the Rear of your Jeep JL Wrangler with a Factory M200 Differential.
BeneFits of this Yoke over Others:
- Adams manufactures this FORGED Yoke here in the U.S.A.
- The U-joint Cap Retainer/Tab goes half way around the yoke unlike most yokes with 3/8 inch around.
- Strongest JL Pinion Yoke on the Market.
This Item will come with the Following Parts:
- (1) JL FORGED M200 1350 Series Rear Pinion Yoke.
- (1) Set of 1350 Series U-bolts.
- (1) Packet of Threadlocker.
Before buying this yoke please confirm That You have an M200 Rear Differential. There are two different options Depending on how the vehicle was ordered or built.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JL Rear Driveshaft (1350) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDRJL-PM5006-SA-HVHK
Adams Driveshaft FORGED Jeep JL Wrangler Rear 1350 Series U-Bolt Style Pinion Yoke for a JL Sahara with an M200 Rear Differential.
This FORGED Pinion yoke is the Strongest on the Market and will allow you to install a 1350 Series Driveshaft to the Rear of your Jeep JL Wrangler with a Factory M200 Differential.
BeneFits of this Yoke over Others:
- Adams manufactures this FORGED Yoke here in the U.S.A.
- The U-joint Cap Retainer/Tab goes half way around the yoke unlike most yokes with 3/8 inch around.
- Strongest JL Pinion Yoke on the Market.
This Item will come with the Following Parts:
- (1) JL FORGED M200 1350 Series Rear Pinion Yoke.
- (1) Set of 1350 Series U-bolts.
- (1) Packet of Threadlocker.
Before buying this yoke please confirm That You have an M200 Rear Differential. There are two different options Depending on how the vehicle was ordered or built
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JL Rear Driveshaft (1310) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDRJL-PM1001-SA-HVHK
Adams Driveshaft FORGED Jeep JL Wrangler Rear 1310 Series U-Bolt Style Pinion Yoke for a JL Sahara with an M200 Rear Differential.
This FORGED Pinion yoke is the Strongest on the Market and will allow you to install a 1310 Series Driveshaft to the Rear of your Jeep JL Wrangler with a Factory M200 Differential.
BeneFits of this Yoke over Others:
- Adams manufactures this FORGED Yoke here in the U.S.A.
- The U-joint Cap Retainer/Tab goes half way around the yoke unlike most yokes with 3/8 inch around.
- Strongest JL Pinion Yoke on the Market.
This Item will come with the Following Parts:
- (1) JL FORGED M200 1310 Series Rear Pinion Yoke.
- (1) Set of 1310 Series U-bolts.
- (1) Packet of Threadlocker.
Before buying this yoke please confirm That You have an M200 Rear Differential. There are two different options Depending on how the vehicle was ordered or built.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JL Rear Driveshaft (1310) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDRJL-PM1001-SP-HVHK
Adams Driveshaft FORGED Jeep JL Wrangler Rear 1310 Series U-Bolt Style Pinion Yoke for a JL Sport with an M200 Rear Differential.
This FORGED Pinion yoke is the Strongest on the Market and will allow you to install a 1310 Series Driveshaft to the Rear of your Jeep JL Wrangler with a Factory M200 Differential.
BeneFits of this Yoke over Others:
- Adams manufactures this FORGED Yoke here in the U.S.A.
- The U-joint Cap Retainer/Tab goes half way around the yoke unlike most yokes with 3/8 inch around.
- Strongest JL Pinion Yoke on the Market.
This Item will come with the Following Parts:
- (1) JL FORGED M200 1310 Series Rear Pinion Yoke.
- (1) Set of 1310 Series U-bolts.
- (1) Packet of Threadlocker.
Before buying this yoke please confirm That You have an M200 Rear Differential. There are two different options Depending on how the vehicle was ordered or built.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JL Rear Driveshaft (1310) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDRJL-PM1004-SA-HVHK
Adams Driveshaft FORGED Jeep JL Wrangler Rear 1310 Series U-Bolt Style Pinion Yoke for a JL Sahara with an M220 Rear Differential.
This FORGED Pinion yoke is the Strongest on the Market and will allow you to install a 1310 Series Driveshaft to the Rear of your Jeep JL Wrangler with a Factory M220 Differential.
BeneFits of this Yoke over Others:
- Adams manufactures this FORGED Yoke here in the U.S.A.
- The U-joint Cap Retainer/Tab goes half way around the yoke unlike most yokes with 3/8 inch around.
- Strongest JL Pinion Yoke on the Market.
This Item will come with the Following Parts:
- (1) JL FORGED M220 1310 Series Rear Pinion Yoke.
- (1) Set of 1310 Series U-bolts.
- (1) Packet of Threadlocker.
Before buying this yoke please confirm that you have an M220 Rear Differential. There are two different options Depending on how the vehicle was ordered or built.
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
OGWG Off-Road Recommended.
Built for serious trail performance and real-world abuse. This Jeep JL Rear Driveshaft (1310) — Adams Forged is trail-tested and trusted by OGWG Off-Road. When reliability matters, Adams delivers.
SKU: ASDRJL-PM1004-SP-HVHK
Adams Driveshaft FORGED Jeep JL Wrangler Rear 1310 Series U-Bolt Style Pinion Yoke for a JL Sport with an M220 Rear Differential.
This FORGED Pinion yoke is the Strongest on the Market and will allow you to install a 1310 Series Driveshaft to the Rear of your Jeep JL Wrangler with a Factory M220 Differential.
BeneFits of this Yoke over Others:
- Adams manufactures this FORGED Yoke here in the U.S.A.
- The U-joint Cap Retainer/Tab goes half way around the yoke unlike most yokes with 3/8 inch around.
- Strongest JL Pinion Yoke on the Market
This Item will come with the Following Parts:
- (1) JL FORGED M220 1310 Series Rear Pinion Yoke.
- (1) Set of 1310 Series U-bolts.
- (1) Packet of Threadlocker.
Before buying this yoke please confirm that you have an M220 Rear Differential. There are two different options Depending on how the vehicle was ordered or built
Why Run Adams Forged?
- Precision balanced for highway stability
- Trail-proven durability
- Heavy-duty U-joint construction
- Built for lifted and off-road applications
- Made in the USA
Fitment: Verify lift height, transmission type, and vehicle configuration before ordering. Contact OGWG Off-Road if you need help confirming compatibility.
No results found
No results match your search. Try removing a few filters.